What are the squeegee centrifuge manufacturers? Operation requirements and maintenance considerations

Nowadays, with the continuous development of science and technology, the manufacturing and application technology of scraper centrifuges is also gradually developing. This not only greatly simplifies the hardware structure, but also becomes versatile and automated. However, because the application of scraper centrifuges in life is not very extensive, many people are not very familiar with scraper centrifuges. Let's take a look at the scraper centrifuge manufacturers. Scraper centrifuge operation requirements and maintenance attention to attention.


刮刀离心机_看图王.jpg


   What are the squeegee centrifuge manufacturers?


   1. Xiangtan Bollen Centrifuge Co., Ltd. (Bollen)

The company's main products are: HR horizontal two-stage piston pusher centrifuge, HY horizontal single-stage piston pusher centrifuge, three-legged centrifuge, decanter centrifuge, flat plate centrifuge and so on.

   2. Zhangjiagang Degao Machinery Manufacturing Co., Ltd. (Dego)

Zhangjiagang Degao Machinery Manufacturing Co., Ltd. is a major centrifuge manufacturer in the domestic separation machinery industry. It has decades of research, design, and manufacture of centrifuges. It has a full range of equipment and perfect testing methods. IS09001- 2000 international quality system certification companies.

   3. Changsha Yingtai Instrument Co., Ltd. (Yingtai)

Changsha Yingtai Instrument Co., Ltd. specializes in producing various types of medical centrifuges and biopharmaceutical centrifuges, and can customize all kinds of special centrifuges and series of matching products according to customer requirements. We have a professional technology development team and won the Silver Award for Independent Innovation at the 5th China International Scientific Instruments and Laboratory Equipment Exhibition. In 2016, we were awarded the Small Giant Enterprise for Science and Technology Innovation. In 2017, we were evaluated as a national high-tech enterprise.


   Scraper centrifuge operation requirements


1. The scraper centrifuge should not exceed 60 minutes at a time.

2. The scraper centrifuge must be reliably grounded; the machine is not used, please unplug the power plug

3. The speed setting must not exceed the maximum speed to ensure the safe operation of the machine.

3, Centrifugal cup must be poured into the sample the same amount, do not make the rotor to run in an unbalanced condition.

5. If there are 0.00 or other figures in use, the machine will not operate. Shut down and power off. After 10 seconds, restart the machine. After the set speed is displayed, press the RUN button again and the machine will operate as usual.

6. In order to ensure safety and centrifugal effect, the instrument must be placed on a solid level table. No items should be placed on the engineering plastic door. The sample must be placed symmetrically, and be sure to tighten the nut before starting.

7. Before use, check the rotor for signs of damage, corrosion, etc. At the same time, check the centrifugal cup for cracks, aging, etc., and immediately stop using it if there are any doubts. Contact with the factory immediately; be sure to tighten the turning head before turning on the machine. Tighten the nuts so as not to accidentally cause the high-speed rotating rotor to fly out.


   Scraper Centrifuge Overhaul Precautions


1. The ground must be cleaned and cleaned in time, and there should be no accumulation of water or oil;

2. The residue and residue in the drum must be removed before maintenance;

3, lifting heavy objects (such as drums, chassis, etc.) must be carried out by professional workers;

4. All threaded joints and positioning holes must be cleaned and properly oiled and protected;

5, all the assembly, especially the replacement of bearings, mechanical seals, etc., must be carried out in a clean place;

6, when the replacement of bearings, should be replaced in the inner and outer rings, spare bearings should be opened and cleaned when installed;

7. The scraper centrifuge must carefully check the quality of the spare parts and accessories to be used before overhauling. The unqualified spare parts and accessories must not be used;

8, when installing bearings, pulleys and other components, it is best to use hot or pressure pressure law, prohibit the use of hand hammer hammering;

9. The disassembled parts and components should be cleaned and neatly arranged, and they must be dust-proof until installation. When multiple scraper centrifuges are overhauled at the same time, the parts and components of each station should not be confused;

10, before the overhaul, must complete the electrical padlock procedures, cut off the power before maintenance. Demolition work is the beginning of the entire inspection work. Regardless of the type of scraper centrifuge, its dismantling consists of two parts: pre-demolition preparation work and disassembly work.

There are many types of scraper centrifuges, and the application range is also very wide. It has good applications in chemical, raw material medicine, food, textile, printing and dyeing, beneficiation and other industries. Have you read the above about the scraper centrifuge manufacturer for everyone? Scraper centrifuge operation requirements and maintenance attention to attention, I believe we now have a certain knowledge of the blade centrifuge knowledge, I hope the above article content can be helpful to everyone.

Fold Mask Machine

Face Mask Maker,Mask Making Machine Price,Mask Manufacturing Machine,Ultrasonic Folding Mask Machine

Dongguan Huitong Automatic Machinery Technology Co., Ltd , https://www.medicalmaskmachines.com