The first thing to consider when constructing an intelligent parking system is to consider the location of the equipment. What are the installation locations that require attention? Anhui Linbo Technology will give you an introduction.
1. Installation position of barrier and controller
The installation position of barriers and controllers (reading devices) is quite critical because it involves the user's convenience. In general, the distance between the barrier and the control machine can not be less than 2.5 meters. Too close distance may cause some vehicles to touch the brake lever when the card is swiped. The recommended distance is 3.5 meters.
The width of the lane is also a consideration for the installation of barriers and controllers. The width of the lane should not be less than 3 meters. If the width is too narrow, it will affect the smoothness of the entrance and exit of vehicles. The recommended width is 4.5 meters.
2. Monitoring camera installation location
Standard smart parking systems generally have image comparison capabilities, so surveillance cameras must be installed at the entrances and exits. The range of viewing angle of the surveillance camera should cover the position of the license plate when the vehicle reads the card. The installation height is generally 0.5-2.5 meters.
3. The installation position of the booth
Parking lot booths play the role of charging and management and are generally installed at the exit location. The post belongs to a small office, which usually arranges on-duty personnel and configures a management computer. Therefore, there is a certain requirement for the area, which is generally not less than 4 square meters.
4. Management computer installation location
The car park system management computer is generally placed at the guard post or other management office. The requirements for its installation location are: The distance between the host computer and the card reading equipment should not exceed 200 meters.
The stainless steel protective mesh is made of stainless steel material such as stainless steel wire, stainless rope. stainless panle. The Metal Mesh netting is used as protective mesh in our family house, buildingand port. The stainless steel mesh has characteristic property and capacity to replace other steel wire mesh in certain application
Stainless Steel Protective Net
Stainless Steel Safty Net,Stainless Steel Wire Safty Net,Stainless Steel Safty Mesh,Safety Net,Security Mesh
Hebei TongChan Imp.&Exp.Co., Ltd. , https://www.tongchanmesh.com