Many of our stone caregivers have this feeling. Stone recrystallization hardening is also the most difficult thing to master in stone care. It is also a process that is difficult to quantify. It costs on the training of workers. The most time-consuming process, as the volume of care stone on the project is getting bigger and bigger, how to polish it faster and better is a problem we must face.
Although stone polishing is difficult to master, it is not irregular. So how do we play with polishing? We have shared our experience with you for many years and hope to help everyone.
First, in order to do a good job of polishing, we must first understand: the premise of polishing is to do the grinding, it is like brocade to embroider beautiful flowers. Doing grinding is not for you to grind to 6000 mesh or 10,000 mesh, but to do the basic grinding.
Second, we must do a good job of polishing in the later stage. We must do waterproof treatment in the early stage of renovation. The basic conditions for polishing are: clean, dry, and certain brightness of the board surface. The degree of dryness in these three conditions is the most direct factor affecting the polishing effect. How to keep the stone dry is to be waterproofed before grinding.
Third, understand the physical and chemical properties and lithology of stone, choose a good polishing agent. To do a good job in stone polishing, you must first choose the materials that are suitable for the working object. How to choose it is necessary to understand the physical properties of stone and the chemical composition of stone. In the face of the dazzling array of products in the company and the market, there will be no way to start or appear. Waste of human and material resources.
Fourth, understand the use of various materials of stone polishing materials: stone crystal hardener has five kinds of media: block, powder, pulp, agent, paste, we must understand the characteristics and advantages and disadvantages of each medium, in the specific stone care work Good application, can make the same good effect on the stone with different physical and chemical properties.
Fifth, master the essentials of stone polishing: multi-media application, multi-variety superposition, multi-pass polishing, quantitative change is the basis, qualitative change is the result.
With this in mind, you can easily play with polished stone.
Jc001.load('news_ads'); jc001.newsAds.prints("24")
SINOFUJI Bushing Cover is made of radiation cross-linked polyolefin or cross-linked EPDM rubber material.
SINOFUJI adopts new molding process for bushing cover in the purpose of providing the world with first-class products and services.
It is SINOFUJI's concern that the bushing cover made by traditional manufacturing process, had been presented that the appearance is almost irregular, the dimension consistency is poor, and the insulation performance is unsatisfied.
While SINOFUJI bushing cover with new molding process presents kinds of advantages:
• Superior performance of aging and electrical insulation.
• regular appearance and accurate consistency in dimensions.
• Could be easily met with personalized design with high production efficiency.
• High material utilization thus total cost is lower than that of traditional process.
• In the cater for requirements of all kinds of special and complex shape thus to expand application scope of this products.
• It is environment friendly cause the cutted raw materials in the manufacturing process can be recycled for production use.
Insulation Covering Box,Cable Joint Box,Heat Shrinkable Busbar Cover,Heat Insulation Cover
ShenZhen FUJI Electric Material Co., Ltd , https://www.sinofuji.com