Before proceeding from the actual decoration to avoid failure of decoration

After the renovation, it was found that there was regret in the room design or layout. The owner naturally felt disappointed. According to the home improvement company's experience, many of the decoration failures are due to the lack of adequate communication between the owner and the designer before the renovation.

Case 1

The practice of wet and dry zoning in bathrooms has become common. In general, the wet area bears the shower function with a large amount of water, and the washing machine and washbasin are arranged in the dry area. For most families, taps for hot and cold water are installed at the washbasin. However, if the water heater is installed in a wet area, the distance between the hot water pipes may be too long. When the hot water is used in the dry area, it needs to wait for several minutes. Ten minutes of time, not only can not use hot water in time, but also cause waste.

â—Ž Solution

Once the hot water is found to be very slow after renovation, the only solution is to increase the water heater nearby, but the water pipes will be “dark paved” when renovating the waterway during decoration. If the water heater is to be added after renovation, the required piping It can no longer be "buried" and can only be laid on the surface of the tile, affecting the appearance. Therefore, it is recommended that consumers must do a good job in the waterway reconstruction plan before the renovation, especially to calculate the distance of the hot water pipes laid by the kitchen and the bathroom from the water heater. If the hot water outlet is more than 10 meters away from the water heater, it should be considered. Add water heaters again nearby.

Case 2

After a period of time, many owners will find that the storage space is far from their requirements. Because with the longer stay, the items in the home will increase. In particular, some young owners often pay attention to the decorative effect when they first renovate, and even sacrifice some storage space to meet their own style and decoration requirements. In this way, once there are problems such as increasing family members and changing seasons, the storage space will be stretched.

â—Ž Solution

The lack of storage space can be increased at any time, because a large number of walls and corners in the room can be turned into good storage places. For example, the second bedroom, study room and other space walls can be extended as storage space, use the height of the entire wall to make a whole wardrobe, to avoid the cabinet top to the wall to leave a health corner, but also can increase a lot of storage space. Such a wardrobe is best customized by a professional manufacturer according to the needs of family members, and the overall style of the room can also be taken into consideration. The side walls of the balcony can also be used to store debris, and the entire storage cabinet and storage rack are good choices.

Case 3

Out of position deviation

During the renovation, the position of the socket needs to be determined before the furniture has been placed. However, the estimated position of the socket may be deviated after placing the furniture, and some socket positions are even blocked by the furniture and cannot be used.

In addition, the kitchen and toilets are also prone to socket failure. If additional appliances are added, they may not be available. In particular, most owners will reserve sockets for water heaters in the bathroom, and will not consider increasing the number of outlets next to the toilets, so that products such as smart toilets cannot be added later.

â—Ž Solution

It is difficult to solve the problem if the deviation of the socket position is too large and the number of sockets is not enough. Only the wiring board can be used, and the toilet water consumption is relatively large. Using the wiring board may cause electric shock. Even if the socket is insufficient, no additional wiring board can be used. Therefore, the location and number of outlets must be addressed at design time, leaving plenty of room for future electricity demand. If economic conditions permit, outlets should be properly increased in the living room and kitchen, because these two spaces are the most suitable. It is easy to increase high-power appliances such as air conditioners, microwave ovens, and dishwashers.

Case 4

Vibrant colors are often used to decorate the room and highlight the owner's preferences. Red, green, and yellow colors have been used in large numbers in the room. Such colors can easily cause intense visual impact. Once the time is too long, it can cause visual discomfort. Especially in the bedroom, bright colors can also affect sleep.

Some bedrooms and living rooms will be equipped with spotlights. Bright colors will excite the eyes with bright light. Therefore, too bright colors are not suitable for large-scale indoor use. If such colors are used, can they be changed after staying there? ?

â—Ž Solution

It is not difficult to change the color. There are now many materials that can replace bright wall paints such as wallpaper, diatom mud, and plaster, among which wallpaper is the easiest to use. In the case of furniture placed indoors, paving the wallpaper will not affect it. When laying the wallpaper, you only need to remove the dust on the surface of the wall paint. At the same time, the color and pattern of the wallpaper are very rich, you can find products that match the interior style, and some wallpaper surface also has bumpy textures, which can make the wall more three-dimensional.

Case 5

Once the toilet is too small, the drainage will be slow, and even the sewage will precipitate during the drainage process, causing the toilet to emit an unpleasant smell. In the construction process, considering that a large slope will affect the appearance of the ground, construction workers may be able to slow down the slope, and too large a slope will increase the difficulty of laying the floor tiles.

â—Ž Solution

If the groundwork has been completed, only to find the slope is too small, it is recommended to select the shower screen, so that you can concentrate the water in the shower area, do not let the water flow to other areas, you can also hang a shower curtain, blocking the water splash.

Case 6

After the check-in, the owner may find that there are various cracks in the wall, the cause of the building itself, the decoration team cutting corners, and the proportion of the mortar used in the plastering layer and the leveling of the wall without plastering will lead to cracking of the wall. skin.

â—Ž Solution

The problem of individual cracks is not serious, because the walls will be affected by weather or buildings. If you think that it is aesthetically pleasing to re-treat the walls, cracks in small areas can be covered with the now popular wall stickers. If the area is large, you can use the wallpaper.

Renovation Preparation Precautions Entrance Decoration Socket Space Wallpaper Interior Decoration Furniture Living Room Wall Color Decoration Living Room Decoration Style Kitchen Cabinet Door Study Furniture Bathroom Tile Study Room Bathroom Tile Color Bathroom Washbasin Bathroom Tiles Whole Bathroom Toilet Design Small Study Bedroom Bedroom Wardrobe Balcony Study Study Kitchen Tiles Balcony Tiles Ld Tiles Bedroom Bedroom Lights

PE Outer wrap tape specifical for oil gas pipeline

Description	Outer wrap tape T200 is engineered to achieve a complete bondto the inner layer tape, providing maximum handling and in-service protection for the coating system.
Usage	Outer wrap tape T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water pipeline. Pipe can be buried, underground ,overhead ,onshore and offshore .
Features & Benefits	l Excellent adhesion to inner-layer tape and self l long term corrosion protection , Resistant to UV l Worldwide reference lists. Established in-ground history l High chemical resistance under service temperature. l Outstanding electric property and permanent adhesion. l Cold applied, No release liner. Makes installation fast and easy. l Complies with ISO,DIN30672,AWWAC214 209,ASTMD1000.EN12068
Main market	Iran,UAE,Iraq,Kuwait,Turkey,Egypt,Libya,Ukraine,Russia,Uzbekistan,India, Australia,Indonesia,Kazakhstan,Ecuador,Venezuela,Bolivia,Argentina, Uruguay,Malaysia and so on.
Material:	Polyethylene backing+ Butyl rubber
Payment:	T/T , L/C,Western Union,Money Gram,Cash
MOQ:	500 roll
Shipment port	Qingdao or Shanghai port
Package:	12 rolls,6 rolls,4 rolls
Sample leading time:	about 5 days in the free season,may be 8 days in the busy season.
Delivery time:	10 days after the order confirmed,and it depends on the quantity of the order.
Brands:	OEM or ODM, we can provide as your requirements, including your design/size/material/weight/Logo/package and so on.
Ordering Information	Tape Coatings are available in roll form.Ordering
Example: T200-25 WHT6X200FT 3`` 25 Tape thickness 20 mils (0.508 mm),25 mils (0.635 mm) WHT Tape color Black (BLK), White (WHI), Blue (BLU),GREEN(GRN) 6 Tape width 1" (25 mm), 2" (50 mm), 4" (101 mm), 6"(152 mm), 200FT Tape roll length 100 ft (30 m) 200FT(60m),400FT(120m),600FT(180m) 3 Tape core diameter 1.5" (38 mm), 3" (75 mm)

Anticorrosion Outer Tape

Pipe Wrapping Tape, Pipe Protection Tape, Polyethylene Outer Wrap Tape, Outer Layer Tape

Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com