The stone curtain wall is usually composed of a slate supporting structure (aluminum beam column, steel structure, glass rib, etc.), and does not bear the structural support structure of the main structure load and function.
1, the general building for the curtain wall to choose the stone is very high hardness and stability. Due to the particularity of many stone materials, most of the curtain walls are designed with granite, andesite and basalt.
2. The water absorption rate of the stone used in the curtain wall (water absorption rate refers to the ability of the stone to absorb water under standard atmospheric pressure) generally cannot exceed 8 percent (8%). The water absorption rate of the same stone is also different, and it needs to be measured by special instruments.
3. The stone that can be used to manufacture the curtain wall was initially selected. The curtain wall stone treatment process used in the manufacturing process is also a big problem. Can not be sloppy, generally have the following three stone processing techniques:
1 high temperature
Granite after high temperature fire shows a rough surface
Process Description: Spray the surface with a flame to cause the crystal to burst and form a rough surface.
Features and uses: Provides good anti-slip protection for granite wall and floor.
Remarks: The stone structure with obvious grain structure will be better, but the surface structure will be destroyed, the physical and mechanical properties will be reduced, and it needs to be thickened.
2 splitting
Process description: a natural surface created by splitting inside or outside the layer
Features and uses: It has a natural decorative effect and is suitable for indoor and outdoor walls and floors of slate. The granite split surface is used for the wall surface to have a heavy effect.
Remarks: Granite cleft surface is often called mushroom stone
3 other
Process description: such as axe surface, ochre surface, rough saw and cutter cutting surface
Features and uses: special decorative effect, suitable for indoor and outdoor walls and floors.
In short, a "great" curtain wall stone project is hard to come by. From the selection of materials to the processing technology of stone, many stone curtain walls strictly require every employee in the process of manufacturing and designing curtain walls, and constantly strive to develop new stone technology. Enterprising, completed one great curtain wall project, and won a lot of praise in the industry!
[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng Stone Net "; you will receive the latest stone news, information, business opportunities! What are you waiting for? Join the China Building Materials First Network - Stone Group: 65406142]
Exterior Wall Cladding is available in 100x200mm, 50x200mm, 60x240mm, 100x297mm, 200x400mm, 300x600mm, 400x800mm, 600x900mm...
There are many types of Outdoor Wall Tile , including imitation granite tiles, imitation marble tiles, mosaic tiles, etc. suitable for different places.
Advantage
1. The surface of the Stone Cladding Exterior has a luster, flat or rough surface, and can present a variety of textures. The design is rich and varied, and has a strong decorative effect.
2, The Outer Wall Tile has superior physical properties, sturdy and durable, good weather resistance, scrub resistance, etc., and has a long service life.
3, With easy to clean, fire, water, wear, corrosion and low maintenance costs.
4. Thin Porcelain Tiles on the outer wall, "light, large and thin", which greatly reduced the building load.
Exterior Wall Cladding Tile construction: adhesive construction, dry-hanging construction, thin porcelain +
Insulation board
Construction Notes
1. When the structure is constructed, the verticality and flatness of the outer wall should meet the standard requirements. The dust, dirt and grease on the surface of the base are removed.
2. On the base plastering surface, first hang the vertical and horizontal control lines, and then hang out the tile control line according to the size and arrangement of the tiles.
3. When the tile is pasted, the mortar should be full. It is not advisable to knock and move more. Especially after the mortar is collected, it cannot be corrected.
4. After the caulking is completed according to the design requirements, clean the surface with a clean cloth.
5. About 30 hours after the completion of the caulking (depending on the weather at the time), and after the brick joint has solidified to a certain strength, rinse the brick surface thoroughly from top to bottom with clean water.
Exterior Cladding
Outdoor Wall Tile,Stone Cladding Exterior,Exterior Wall Cladding,Outer Wall Tile,Exterior Wall Cladding Tile
UMS New Materials Industry Co.,LTD , https://www.ums-factory.com