In the early morning of May 6, the US suddenly issued a tweet on Twitter, claiming that it would raise tariffs on Chinese goods again this Friday, and threatened to impose tariffs on all Chinese exports to the United States.
Just two or three days ago, he also said to the media with eloquence that "the United States and China are close to reaching a 'very historic, landmark' economic and trade agreement."
When the voice did not fall, there was a big turn of 180 degrees.
It is quite surprising.
If you look at this matter, you can say a few things.
First of all, the wording of extreme pressure is reflected in Twitter's wording. What kind of negative impact this will have on the consultation depends on the next action of the US.
As of now, the US Trade Representative Office (USTR) has not announced a declaration of tariff measures. Many analysts believe that the wording of Twitter may be a means of extreme pressure in Sino-US consultations.
Put on the look of the table and see if you can get some more.
China’s response to this is very simple, just a word.
The Ministry of Foreign Affairs made a brief response at the regular press conference on the afternoon of the 6th.
Regarding the US threat to impose tariffs on Chinese products, similar situations have occurred many times before. The position and attitude of the Chinese side have always been very clear, and the US is very clear about this.
In Tao Ran’s notes, it’s not too surprising to throw this content at the crucial moment of the consultation.
In fact, the US side should now seriously consider the negative impact of this statement on itself.
On behalf of the lobbying organization of more than 150 trade associations in the United States, Tariffs Hurt the Heartland said in a statement that in the past 10 months, Americans have been paying for the full cost of the trade war, not China; Will punish American farmers, businesses and consumers. The statement pointed out that ... recent estimates show that raising the tariff to 25% will damage nearly 1 million US jobs and increase financial market turmoil.
Fighting trade, there is no winner.
If someone can't see this after more than a year of competition, then the facts will only go to him again and again until he sees it.
Secondly, the low-profile attitude in the early stage indicates that China is ready to respond to various situations.
The US often emphasizes that China does not satisfy certain demands of the US, but as to whether such appeals are reasonable, whether it is truly fair or not is often ignored.
If we ignore China’s sincere attitude and actions and don’t care about true fairness, it’s not surprising to produce such a result.
From another angle, we can also see that China has repeatedly emphasized the position of " resolutely defending the core interests of the country and the fundamental interests of the people and never compromise on the issue of principle " for more than a year. It is not empty talk, but a slogan and a promise.
The premise of negotiating and negotiating is mutual respect, equality and mutual benefit. Some people feel that the threat is good, so naturally they must be prepared to bear the corresponding consequences. Looking back now, the low-key of China in the past period of time should be the performance after fully estimating various situations.
The experience of more than a year proves that the impact of the US tariff increase is controllable, and the economic data of the first quarter confirms the tenacity of the Chinese economy.
If anyone feels that they can try again, he will find that China is ready to respond to various situations.
Third, China’s policy of “maintaining openness and adhering to high-quality development†will not change.
Some people will find that the trade war has been talked about for more than a year, and China’s position has not changed much.
The attitude of "do not want to fight, not afraid to fight, have to fight if necessary" has not changed;
The attitude of “firmly safeguarding national dignity and core interests†has not changed;
The attitude of "maintaining openness, high-quality development, and the key is to do your own thing" has not changed.
The US itself often said that if a method works, then whether it is a clever way or a clumsy method is a good way.
Based on the current volume comparison and development trend analysis between China and the United States, as long as we can concentrate on developing ourselves and insist that “the key is to do our own thingâ€, then no matter what measures Americans take, the negative impacts are predictable and controllable.
Of course, the principle of our openness is also very clear. As stated in the “Belt and Road†summit forum, it is necessary to look at three “favorablesâ€.
It is conducive to promoting high-quality economic development, is conducive to satisfying people's yearning for a better life, and is conducive to world peace, stability and development.
When you don't understand it, take this standard to get a card, and the amount will be clearer.
It is good for us, no one needs to say, we will do it too.
If it is not good for us, let's say that we will break the big day and don't feel that we will give in.
Don't even think about it.
On the contrary, the US side needs to recognize the situation and see where the best interests lie.
I want to see them, they toss and toss, and I am afraid I still can't get around the negotiating table.
Before that day, maintaining the strength is the most important factor in dealing with the Sino-US issue. No matter what the situation is, we will not change the rhythm of our own development and cannot change.
Before the Chinese side prepares to go to the US for consultations, it is still the same thing to do their own thing, instead of listening to others saying that the wind is rain, which is the fundamental solution to the problems and contradictions. (
Black metal industry standard of the People's Republic of China: Ultra High Power Graphite Electrode (YB/T 4090-2000) "regulation of the ultra High Power Graphite Electrode shape, size and allow deviation, technical requirements, test methods, inspection rule, packing, marking, storage, transportation and quality certificate. It is applicable to high - power Graphite Electrode, which is made of high quality needle coke as the main raw material, which is made of molding, roasting, impregnating, graphitization and machining.
Graphite is very common in nature, and graphene is the intensity of the highest substance known to mankind, but scientists could still take several years or even decades, to find a way to graphite into a large high quality graphene "thin film" method, thus they can be used to manufacture all kinds of useful material for mankind. According to scientists, graphene in addition to very strong, but also has a series of unique features, graphene or conductive performance of the best known materials, which makes it also has great potential applications in the field of microelectronics. The researchers even see graphene as a substitute for silicon that can be used to produce future supercomputers.
superiority
1: the increasing complexity of the geometry of the mould and the diversification of the product application result in the higher and higher demand for the discharge accuracy of the spark machine. The advantage of graphite electrode is that it is easy to process, high removal rate and low graphite loss. Therefore, some of the group spark machine customers have abandoned copper electrode instead of graphite electrode. In addition, some special shaped electrode can't made of copper, but easier to forming, graphite and copper electrode is heavier, not suitable for processing large electrode, these factors have caused part of the group of the graphite electrode spark machine customer applications.
2. Graphite electrode is easier to process, and the machining speed is obviously faster than that of copper electrode. For example, graphite is processed by milling process, and its processing speed is 2~3 times faster than that of other metals, and no additional manual processing is required, while the copper electrode needs to be worn by hand. Similarly, if you use a high speed graphite processing center to make the electrode, it will be faster, more efficient, and will not produce dust problems. In these processes, selecting the right tools and graphite can reduce the abrasion loss of the cutter and the breakage of the copper gong. If the concrete is the milling time of graphite electrode copper electrode and graphite electrode, graphite 67% faster than copper electrode, in the general case of electro discharge machining, the adoption of graphite electrode machining 58% faster than using copper electrode. In this way, the processing time is greatly reduced and the manufacturing costs are reduced.
3: the graphite electrode is different from the traditional copper electrode design. Many mold factory in copper electrode roughing and finishing usually have different requirements, and graphite electrode is used almost the same amount of reserve, this reduces the CAD/CAM and the frequency of machine, sheet is for this reason, to a large extent is enough to improve the precision of the mold cavity.
Of course, the first thing that should be clear is how to use graphite materials and other related factors after the copper electrode is transferred to graphite electrode. Today, some group spark machine customers use graphite for electrode discharge machining, which is exempt from the process of mold cavity polishing and chemical polishing, but still achieve the desired surface finish. If the process of time and polishing is not increased, it is impossible for the copper electrode to produce such an artifact. In addition, the graphite is divided into different levels, and in particular the application of using the appropriate level of graphite and spark discharge parameters to achieve the ideal processing effect, if in the use of graphite electrode spark machine operators use the same as the copper electrode parameters, then the result is certainly disappointing. If the material of the electrode is strictly controlled, the graphite electrode can be used in the non-loss condition (less than 1%), but the copper electrode is not used.
Ultra High Power Graphite Electrode
Ultra High Power Graphite Electrode,Conductive Graphite,Mesh Graphite Electrode,Special Graphite Electrodes
Fengcheng Ruixing Carbon Products Co., Ltd , https://www.lnfcrxts.com