In fact, wireless monitoring developed by Tengyuan Zhituo can also operate normally during typhoons or storms. Why did wireless monitoring equipment suffer from typhoons? Mainly, the most common problem is that the device burns because of a lightning strike, or the typhoon blows away the fixtures of the fixed device, or deflects the angle of the device, or the device enters water. Therefore, we must proceed from these points and do a good job of guarding against these problems.
1, do lightning protection measures, Teng Yuan Chi Tin's equipment can increase the lightning protection module, which can reduce the impact of induced lightning to a certain extent, but if the equipment is installed in the minefield, it is best to install an additional professional The lightning protection measures are better.
2. Fix the brackets for installing the equipment. If it can be installed on the eaves and walls, it is usually best to use a U-shaped bracket to fix the equipment. However, if you install it in a typhoon-prone or stormy area, you can add another protective box. To avoid the direct invasion of typhoons. It is best to leave the equipment away from trees or other unstable supports so as to avoid blowing the trees or other supports in the typhoon and just hit our wireless monitoring equipment.
3. If it is marked as a waterproof device, it will not normally enter the water during the storm. However, during installation, it must be noted that the leading end of the outlet line must not be higher than the outlet of the device. Otherwise, rain will follow. Lines flow into the equipment, sometimes due to this little bit of rain, and the internal circuit board of the equipment will also be affected. If you encounter equipment damaged by water, you must first disconnect the 220V power supply for maintenance work.
Under normal circumstances, do a good job of the above points, Teng Yuan Chi-radio wireless monitoring equipment can operate normally in the typhoon, users do not need to worry too much.
Base Seals are an important component used to seal machines and equipment. They are usually used to prevent liquid or gas leaks and protect machines and equipment from dust, pollutants, and other external elements. Base Seals mainly include rubber seals, oil seals, mechanical seals, O-rings, U-rings, V-rings, X-rings, and other types.
Rubber seals are a type of seal widely used in various machines and equipment. They are usually made of rubber materials and have characteristics such as wear resistance, corrosion resistance, high temperature resistance, and low temperature resistance. Rubber seals are mainly used to seal liquids or gases in machinery and equipment, such as automotive engines, water pumps, pipelines, fans, refrigeration equipment, etc.
Oil seal is a type of seal specifically used to seal lubricating oil. They are usually made of rubber and metal materials and have characteristics such as wear resistance, corrosion resistance, and high temperature resistance. Oil seals are mainly used in equipment such as automotive engines, industrial machinery, water pumps, and hydraulic systems to prevent lubricant leakage.
Mechanical seals are advanced seals used to seal machines and equipment. They are usually made of metal and ceramic materials and have characteristics such as wear resistance, corrosion resistance, high temperature resistance, and low temperature resistance. Mechanical seals are mainly used in high-speed rotating equipment, such as centrifugal pumps, compressors, fans, centrifugal separators, etc.
O-ring is a common sealing element, usually made of rubber material. They have good sealing performance and elasticity, and can be used to seal various liquids and gases. O-ring is mainly used in fields such as automobiles, machinery, and electronic equipment.
A U-shaped ring is a sealing element with a U-shaped cross-section, usually made of rubber material. They have good sealing performance and elasticity, and can be used to seal various liquids and gases. U-rings are mainly used in hydraulic systems, pneumatic systems, automotive braking systems, and other fields.
A V-ring is a sealing element with a V-shaped cross-section, usually made of rubber material. They have good sealing performance and elasticity, and can be used to seal various liquids and gases. V-rings are mainly used in fields such as automobiles, industrial machinery, and hydraulic systems.
7. X-shaped ring
An X-ring is a sealing element with an X-shaped cross-section, usually made of rubber material. They have good sealing performance and elasticity, and can be used to seal various liquids and gases. The X-ring is mainly used in hydraulic systems, pneumatic systems, automotive braking systems, and other fields.
X Ring,O Ring,Ptfe Gasket,Back Up Rings
DG Zhongxingshun Sealing Products Factory , https://www.zxs-seal.com