Strong and weak electricity transformation instructions
1 The transformation of the water circuit is the most important aspect of the renovation. The first industry mainly has a general idea of ​​overall renovation. It is necessary to separate the management of the sub-items and divide the whole into several small parts, making progress in a step-by-step manner. Very clear, management is also very clear.
2 In terms of circuit reconstruction, we first talk about the kitchen, make an appointment for the cabinet manufacturers and the hydropower installation company, together with the overall design of the kitchen.
3 to determine the location of electrical appliances such as: soot, rice cookers, rice cookers, microwave ovens, kitchen treasures, water purifiers, and refrigerators and other household appliances, clear these can know the location of the wall socket, and the general design of the kitchen can be set.
4 Living room - including power cord (2.5mm2 copper) lighting line (2.5mm2 copper), air conditioning line (4mm2 copper), TV line (feeder), telephone line (4-core sheathed line), computer line (5 Bipeds), living room wall outlets do not have much change, nothing more than one or two on the TV wall, cable and socket to be parallel to achieve beautiful and unified standards; there is a water diverter at the corner of the living room The power supply, etc. ... changes will not be great.
5 lighting - living room ceiling light according to the needs of life can be considered to install sub-control switch (into the hall and back to the main bedroom door)
6 bedrooms - including power lines, lighting lines, air conditioning lines, TV feeders, telephone lines, computer lines, and alarm lines. Reserve a power cord at the top of the bedside table and use a 5-hole patch panel with a switch, which can reduce the trouble of not switching on the bedside light. Telephone lines should also be reserved if the double headboard
Power and telephone lines should be reserved separately above the two nightstands. A power supply connection (hair dryer) should be reserved above the dressing table. In addition, there should be a reflector lamp above the dressing mirror and a switch beside the wiring box. Above the desk or computer desk should be installed power cord, computer cable, telephone line interface. Single or overhead lighting can be used for lighting. Single switch can be used. Multi-headlights should be equipped with sub-controllers. According to the need to adjust the brightness, it is recommended to use dual-control switch. One is installed on the outside of the bedroom door and the other is installed on the side of the bedside cabinet. Or the bed easier to operate parts.
7 Toilets—Power lines, lighting lines, telephone lines, and background music lines. It is advisable to use 4mm2 cables for power cables. Consider electric current heaters, electric heaters, and other high-current devices. Electric heaters, currently optimistic about the Yuba, can solve the lighting, heating, exhaust and other issues, the bathroom switch should be placed indoors. The lighting should be placed outside the door. The telephone interface is best chosen around the toilet, not the door. Yuba should be considered to be installed near the shower room or bath instead of in the center of the bathroom. Look at the construction drawings for hydropower when installing bathroom mirrors and mirror headlights.
Prevent accidental injury to the mirror tube and wash basin water pipes.
8 Air-conditioning power supplies - General air-conditioning power supplies are laid well, and there are not many changes in the location.
9 Note: When strong and weak currents are crossed, they must not be separated. In addition, the TV feeders and telephone lines should be separated from the power line when the pipe is routed.
1 The transformation of the water circuit is the most important aspect of the renovation. The first industry mainly has a general idea of ​​overall renovation. It is necessary to separate the management of the sub-items and divide the whole into several small parts, making progress in a step-by-step manner. Very clear, management is also very clear.
2 In terms of circuit reconstruction, we first talk about the kitchen, make an appointment for the cabinet manufacturers and the hydropower installation company, together with the overall design of the kitchen.
3 to determine the location of electrical appliances such as: soot, rice cookers, rice cookers, microwave ovens, kitchen treasures, water purifiers, and refrigerators and other household appliances, clear these can know the location of the wall socket, and the general design of the kitchen can be set.
4 Living room - including power cord (2.5mm2 copper) lighting line (2.5mm2 copper), air conditioning line (4mm2 copper), TV line (feeder), telephone line (4-core sheathed line), computer line (5 Bipeds), living room wall outlets do not have much change, nothing more than one or two on the TV wall, cable and socket to be parallel to achieve beautiful and unified standards; there is a water diverter at the corner of the living room The power supply, etc. ... changes will not be great.
5 lighting - living room ceiling light according to the needs of life can be considered to install sub-control switch (into the hall and back to the main bedroom door)
6 bedrooms - including power lines, lighting lines, air conditioning lines, TV feeders, telephone lines, computer lines, and alarm lines. Reserve a power cord at the top of the bedside table and use a 5-hole patch panel with a switch, which can reduce the trouble of not switching on the bedside light. Telephone lines should also be reserved if the double headboard
Power and telephone lines should be reserved separately above the two nightstands. A power supply connection (hair dryer) should be reserved above the dressing table. In addition, there should be a reflector lamp above the dressing mirror and a switch beside the wiring box. Above the desk or computer desk should be installed power cord, computer cable, telephone line interface. Single or overhead lighting can be used for lighting. Single switch can be used. Multi-headlights should be equipped with sub-controllers. According to the need to adjust the brightness, it is recommended to use dual-control switch. One is installed on the outside of the bedroom door and the other is installed on the side of the bedside cabinet. Or the bed easier to operate parts.
7 Toilets—Power lines, lighting lines, telephone lines, and background music lines. It is advisable to use 4mm2 cables for power cables. Consider electric current heaters, electric heaters, and other high-current devices. Electric heaters, currently optimistic about the Yuba, can solve the lighting, heating, exhaust and other issues, the bathroom switch should be placed indoors. The lighting should be placed outside the door. The telephone interface is best chosen around the toilet, not the door. Yuba should be considered to be installed near the shower room or bath instead of in the center of the bathroom. Look at the construction drawings for hydropower when installing bathroom mirrors and mirror headlights.
Prevent accidental injury to the mirror tube and wash basin water pipes.
8 Air-conditioning power supplies - General air-conditioning power supplies are laid well, and there are not many changes in the location.
9 Note: When strong and weak currents are crossed, they must not be separated. In addition, the TV feeders and telephone lines should be separated from the power line when the pipe is routed.
NVC lighting TV switch lighting bedside living room TV socket bedroom door decoration living room master bedroom decoration mirror front lamp cabinet door kitchen cabinet door bathroom design overall bathroom bathroom door small bedroom bedroom door to bedroom door bedroom lamp
Peg Board,White Peg Board,Pp Material Peg Board,Double-Sided Peg Board
NARWILL IMPORT&EXPORT CO.LTD , https://www.narwill.com