ã€China Aluminum Industry Network】 1. The thickness of the aluminum buckle plate The aluminum buckle plate on the market has a variety of thicknesses ranging from 0.5 to 0.8 mm. A lot of sales will tell you that the aluminum buckle plate is very thick and very good. In fact, the quality of the aluminum buckle is not entirely based on the thickness. As long as the flexibility of aluminum is good, 0.6 mm is sufficient.
0.8mm aluminum buckle plate is generally used for engineering, because the aluminum buckle plate used for tooling is often very long, in order to prevent the intermediate fall, so choose a thick, and home improvement with aluminum buckle plate rarely more than 4 meters, 0.6 Millimeters is enough.
2, identify the material is good or bad The key to good aluminum buckle aluminum plate material is good flexibility and strength. The method of identification is simple: Take an aluminum gusset and bend it by hand. Bad aluminum gussets can be easily bent and will not return to their original shape.
For a good aluminum buckle plate, it takes some effort to bend, and after bending, it rebounds to a certain extent. This is the difference in toughness and strength between aluminum materials. A good aluminum buckle plate will not bend or fall in the middle after installation, ensuring smoothness.
3, the aluminum buckle plate film to identify the surface of the film to identify the quality of the way is to look at the edge of the aluminum buckle board to see if the film can be lifted. Qualified aluminum plate coating is compounded at high temperature, it cannot be peeled off, and it can certainly be glued and cannot be removed.
In addition, once the aluminum buckle plate is installed, it rarely moves, and it hangs on the roof. The difference between the so-called imported film and domestic film is basically not seen. Therefore, there is no need to care if it is an imported film. Just compare a few samples in the light and choose a good gloss.
Precautions:
In the kitchen, the hose flue of the hood is fixed, the position of the hood is determined, and the ceiling is suspended. In the bathroom, the bathroom is installed first, and the exhaust fan is suspended.
In advance, tell the workers the location of the lamp, the Yuba, and the release, in order to determine the position of the opening, and the Yuba keel should be installed on its own, or a self-made simple wooden frame.
Do not install exhaust fans, bathroom heaters, and large lamps directly on the gussets or keels and they can be directly reinforced on the top.
The square plate is made of light steel keel. The slats are made of aluminum keel or galvanized keel. The direction of measurement is based on the construction drawings. The depth of 3-4 cm is appropriate to prevent damage to the conduit and the waterproof layer. It is better to set up inspection holes, which can be installed in concealed and easy-to-check places and be artistically treated.
Split Solar Flood Light,Led Solar Flood Light,Waterproof Solar Flood Light,Solar Flood Lights Outdoor
Land of Lights Electric Appliance Co., LTD , https://www.loloutdoorlight.com