How to choose solid wood furniture? What are the tips for purchasing solid wood furniture? Frequently exposed to the owner's experience of buying solid wood furniture on the deception, Xiaobian finishing the purchase of solid wood furniture six tricks, I hope to help you buy.
How to choose solid wood furniture? Let's share with you the seven tricks to buy solid wood furniture.
1. Judging whether the furniture of the solid wood furniture brand is really made of solid wood.
Mainly watch the door panels and side panels, they are the testimony of the solid wood furniture craftsmanship.
Tips: knots, wood grain and cross section
Scarred: Look at the location of the scared side, and then find the corresponding pattern on the other side.
Wood grain: The appearance looks like a pattern, so the position of the pattern change corresponds to the corresponding pattern on the back of the cabinet door. If the correspondence is very good, it is pure solid wood.
Section: The color of the section is deeper than the panel, and it can be seen that it is made of whole piece of wood. This is the most representative feature of Chinese solid wood furniture.
2, look at the tree species ------- solid wood furniture prices a very influential factor
What kind of wood is made of wood, which directly affects price and quality. From the cheapest pine, eucalyptus, to expensive mahogany, the price difference is dozens of times. Therefore, do not consider the tree species because it is solid wood. After all, solid wood like pine, in addition to environmental protection, performance is much worse than the artificial board. For the average family, the most important use is. Ouyage's fragrant Nanmu furniture is finely colored and colored. After the coloring, the three-dimensional beautiful texture is revealed, and the processing performance is also very good. Overall, the price is good.
3, observe the wood with or without defects, the failure of the solid wood process leads to a major factor of wood defects.
Several major defects in solid wood: cracking, crusting, insect eyes, mildew
Pay close attention to the details when purchasing.
Cracking: Naturally can't buy.
Scarred: If there is a scar on the front, the same position on the back also has this knot. This knot is basically a dead knot. It takes a long time and will fall off. Therefore, furniture with such defects cannot be bought.
Insect eye: Although many furniture are said to have been dried and degreased, you think that China is so big, so many solid wood furniture factories, the state management is so weak, the credibility must be at least 50% off. In addition to those Western-style solid wood furniture, deliberately engraved on the wormhole (modern Chinese furniture can not have this habit), so the other should not buy.
Mildew: It is the fact that the wood is green and has water marks. Although the sales aunt will tell you that it has been dried, no problem. But you think about it, after the moldy bread has been reprocessed, will you still eat it? Imagine that the children's solid wood home made for children has a "mold" poison, can you guarantee the healthy growth of your baby? The performance of the wood has not been the same as before.
4, look at the connection of various parts of the furniture
Good solid wood furniture is connected by means of gutters and other places where the local load is relatively large, and is also reinforced by screws and protective blocks. If you see solid wood furniture, all of which are fixed by screws, but the rigidity of such furniture is not high. So to judge the firmness of the furniture, you can judge by shaking the furniture and feeling the stability.
5, look at the quality of the paint on the furniture surface
The most feared of solid wood furniture is water and fire. Needless to say, there is an old saying about the fear of water: dry millennium, wet millennium, dry and wet, can't live for years. It is about the fear of water in solid wood. So look carefully at the furniture where there is no place to paint, the key points: the top and bottom of the cabinet door, the interior of the large cabinet. Touch the painted surface by hand to see if there are burrs or bubbles.
6, look at the details of the furniture drawer.
The drawer should be solid and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to ensure that they can be used freely and properly connected. The bottom plate of the drawer has a certain thickness, and the bottom plate of the drawer is connected by a groove instead of a nail.
Summary of small series: six major tricks for purchasing solid wood furniture, the most important thing for solid wood furniture is to select materials. When signing a contract, please be sure to ask the merchant to indicate the material of solid wood furniture.
Brief introduction:
XK3102 weighing indicator has various advantages such as perfect function, stable performance, wide suitability, multiple function and convenient operation and is mainly suitable for static electronic Truck Scale.
Features:
Tarring function: Including manual tarring, digital tarring and automatic tarring.
M+ and M- functions: Maximum 8-digit for M+, maximum 4-digit for M-and having 50 classification.
Truck storage function: Being able to store 400 truck numbers and tare weight with 6 digits.
Code function: Having 50 groups of codes that can set tare weight, lower limit, under load, below load, upper limit.
Record function: Being able to record 1200 groups of weighing data. Recording contents include serial number, truck number, code, gross weight, net weight, tare weight, time and date.
Query function: Being able to query on truck number/tare weight, code, record and so on.
Digital calibration: Being able to make two-point non-linear calibration.
Time display function.
Rich printing function.
The panel has seal cover and reserves lead seal hole and is convenient for parameter programming, scale calibration and device management.
Rich interface function: One RS-232C (or RS-485), one 20mA current loop and one Centronics printer interface.
Watchdog circuit is used for ensuring normal operation of indicator.
Display: 6-digit VFD (main display), 8-digit VFD (secondary display) and 14-digit state display.
Weighing Indicator,Weighing Indicator With Lcd Display,Weighing Indicator For Truck Scale,Large Display For Railway Scale
SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com