Rolling bearing stop view

Home>Bearing knowledge> Rolling bearing stop view
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Rolling bearing stop view

Source: China Bearing Network Time: 2013-09-09

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Regular viewing of the bearing seal is an important task for adhering to the bearing in the best case. The most favorable viewing time is to schedule the time during the stop.
The importance of clean bearings:
It is very important to adhere to the bearing and smooth cleanliness.
Before the inspection, the external appearance of the machine should be taken; then the parts around the bearing are removed. The oil seal is a very weak part; therefore, it must be taken care of; do not apply excessive force; then carefully look at the oil seal and its surrounding parts; if it has been presented When the performance is bad; it must be replaced; a bad oil seal will cause damage to the bearing and cause the equipment to stop.
Check that the smoothing agent is stained with a smoothing agent between the two fingers; if there is a contaminant, feel it; or apply a thin layer of smoothing agent on the back of the hand; then seal it.
Replace the smoothing agent oil smooth bearing after the old oil is drained; if possible; refill the fresh oil and let the machine rotate at low speed for a few minutes. Try to get the oil to collect the residual contaminants; then drain the oil The oil is best filtered before use.
Smooth grease smooth bearings should prevent cotton from coming into contact with any part of the bearing when replacing smooth grease; these residual fibers can be wedged between the tumbling members and cause damage; especially for small bearings. Pay attention to this problem.
Cover the exposed bearings to see the bearings; do not expose the bearings to contaminants or moisture. If the operation is stopped; cover the machine with oil-paper plastic sheets or similar materials.
If the unshielded bearing is removed without being disassembled and can be viewed; remove it with a white spirit by applying a brush; then dry it with a lint-free cloth or blow it with compressed air. Dry (pay attention not to let the bearing assembly start to rotate).
Use a small mirror and a probe similar to that used by dentists to view the track surface of the bearing, the holder and the beads. If the bearing is not damaged, it should be smoothed according to the smooth clarification provided by the original machine.
Do not remove the bearing with a sealing cover or dustproof, only scrub the external appearance.
If the bearing is damaged, it needs to be replaced. It is much more economical to replace the bearing during the timed stop protection period than the loss of the bearing due to bearing damage.
Recommend to friends comments close window

Bearing related knowledge
What is the characteristic of the bearingless motor and the identification of the residual magnetism of the bearing using the fan bearing on the market?
Precautions when buying bearings, ceramic bearings


This article links to http://
Please indicate the bearing network http://

Previous:Discussion on gas smooth bearing Next edition: Changes in the use of rolling bearing manufacturing equipment

This PE plastic Septic Tank is specially designed to replace the fibreglass septic tank. It is light in weight but strong in structure. It is made by one time molding without welding and bonding. It can be produced in different colors as per your need. It can also be done with different wall thickness. 

PE Septic Tank

Pe Septic Tank ,Poly Septic Tank,Septic Tank Treatment,Above Ground Septic Tank

Shandong Hiking International Commerce Group Co.,Ltd , http://www.hikingfrp.com