Many owners are very entangled in the design of the bathroom, especially in the toilet toilet purchase, always consider a lot of problems. Today, Xiao Bian recommends the opinions and opinions of several people, and teaches you the seven steps to choose a toilet!
1. Caliber: Large-diameter sewage pipe with glazing on the inner surface, it is not easy to hang dirty, and the sewage is quick and powerful, effectively preventing blockage. The test method is to put the whole hand into the toilet mouth, and generally have a palm capacity as the best.
2, water tank: water leaking toilet water tank in addition to the obvious dripping sound can be determined, generally not easy to find, simple check method is to drop blue ink in the toilet tank, stir well to see if there is blue water out of the toilet outlet, if This indicates that there is a leak in the toilet. Remind that the water tank is best to choose a higher height, so the impulse is very good. (Note: The flushing capacity below 6 liters can be listed as a water-saving toilet.)
3, water: water directly determines the service life of the toilet. The quality of the water quality of branded toilets and ordinary toilets is very different, because almost every family has experienced the difficulty of water tanks. Therefore, when selecting a toilet, do not ignore the water parts. The identification method is to listen to the sound of the button. The crisp sound is the best.
4, weight: the heavier the toilet, the better, the average toilet weight is about 50 kg, a good toilet is about 100 kg. The weight of the toilet is high and the quality is relatively good. A simple way to test the weight of the toilet: pick up the lid of the tank with both hands and pick up the weight of it.
5, the water outlet: the bottom of the toilet is the best one, now many brands of sewage holes are 2-3 (according to different caliber), but the more the drainage holes, the more impact. The outlet of the bathroom has the following drainage and horizontal drainage. It is necessary to measure the distance from the center of the sewer to the wall behind the water tank. Buy the same type of toilet to "sit into the seat, otherwise the toilet can not be installed. The horizontal drainage toilet The outlet should be equal to the height of the horizontal drain, preferably slightly higher, to ensure that the sewage is smooth, 30 cm for the middle and lower water toilet: 20 to 25 cm for the rear water toilet; for the distance of 40 cm or more for the former water Toilet bowl. The model is slightly wrong, and the water is not smooth.
6, glazed surface: pay attention to the glaze of the toilet, the quality of the toilet glazed surface should be smooth and smooth without blistering, saturated color. After checking the glazed surface of the outer surface, you should also touch the sewer of the toilet. If it is rough, it will be easy to be left behind.
7, flushing: From a practical point of view, the toilet should first have a basic function of flushing thoroughly. Therefore, the flushing method is very important, and the flushing water of the toilet is straight-through type, rotary siphon type, whirlpool siphon type, and jet siphon type. Pay attention to the choice of different drainage methods: the toilet can be divided into “rushing downâ€, “siphon flushing†and “siphon swirlingâ€. The flushing type and the siphon flushing type have a water injection capacity of about 6 liters, and the sewage discharge capacity is strong, but the sound is loud when flushing; and the vortex type has a large amount of water at a time, but has a good mute effect. Consumers may wish to try the siphonic toilet, which has the advantages of both straight flushing and siphoning. It can quickly flush dirt and save water.
Tips:
1. You should choose a toilet with a moderate amount of water storage. If the water storage capacity is too high, it will splash the buttocks. If the water storage capacity is too low, it is easy to run.
2, after the installation of the toilet, you must try the flushing effect in the first time, the best way is: find a cigarette butt into it, you can rush down, and the sound is not big, indicating that the installation process is no problem.
3. The flushing method of the general seat selection is related to the sewage pipeline of the building. For example, the old building and the pipeline are in the “S†type. It is recommended to use the flushing toilet. If the new building does not matter, it is better to choose the siphon type and deodorant. The effect is good.
High Pressure Laminated Wall Paneling
High Pressure Laminate,Hpl Laminated Board,High Pressure Laminate Wall Panels,High Pressure Laminated Wall Paneling
Jiangmen Feifan Industrial Co.,Ltd , https://www.cementboard.net