Indoor Installation:
When using LED light strips for indoor decoration, installation is straightforward since they don’t need to endure harsh weather conditions. Take BHP’s LED strips as an example—each strip comes with a 3M double-sided adhesive on the back. To install, simply peel off the protective layer and stick it directly onto the desired surface. For corners or longer lengths, it's easy to cut the strip at designated points. Each segment consists of three LEDs connected in a series-parallel configuration, allowing individual sections to be used independently.
Outdoor Installation:
For outdoor use, where wind and rain are factors, relying solely on 3M adhesive may not be sufficient over time. The adhesive can weaken, causing the strip to fall off. Therefore, it's common to use a clip-based mounting system, especially when cutting and connecting the strip. The process is similar to indoor installation, but waterproof glue should be applied at connection points to ensure durability and prevent water damage.
Power Connection Method:
Most LED strips operate on 12V DC, so a switching power supply is required. The size of the power supply depends on the total power consumption and length of the LED strip. If you want to control multiple strips from one source, a larger power supply can be used, and all strips can be connected in parallel. If the wire isn’t long enough, you can extend it separately. This centralized approach allows for easier control, though it limits individual strip adjustments. Always make sure to match the voltage and polarity correctly.
Important Notes:
a. Do not connect the LED strip directly to AC 220V unless specified. b. Avoid reversing the positive and negative poles. c. Operators should wear an anti-static wristband during installation.
Controller Connection:
To achieve dynamic color changes, RGB LED strips require a controller. The control range varies depending on the type of controller. A basic controller typically works up to 10–15 meters, while remote controllers can reach 15–20 meters, with some models extending up to 30 meters. If the LED strip is very long and the controller can't reach, a signal booster or power amplifier might be needed.
Connection Distance Considerations:
Standard LED strips like the 3528 series can be connected up to 20 meters, while the 5050 series is limited to 15 meters. Exceeding these distances can cause overheating, reducing the lifespan of the LED strip. Always follow the manufacturer's guidelines to avoid overloading the system.
Things to Consider When Purchasing Custom LED Strips:
Many customers require custom LED strips that don’t fit standard specifications. However, without proper technical knowledge, some requests may not be feasible or could lead to performance issues. Here are three key considerations for special custom orders:
1. Circuit Design: LED strips can have series, parallel, or series-parallel circuits. A series circuit ensures consistent current but fails if one LED is damaged. Parallel circuits allow individual LEDs to function even if others fail, but without proper resistors, it can cause damage. Series-parallel designs offer the best balance, ensuring efficiency and reliability.
2. Number of LEDs per Meter: The number of LEDs per meter is usually fixed (e.g., 60 LEDs per meter for 1210, 30 for 5050). Customizing to non-standard numbers, such as 50 LEDs per meter, requires circuit modifications. This can lead to inefficiencies, so it’s important to keep the number of LEDs a multiple of 3 for optimal performance.
3. Cutting Points: Most LED strips are designed with pre-determined cutting points between groups. Some customers may request cuts between single LEDs, which is not recommended. This creates a parallel configuration, reducing the lifespan of the entire strip due to inconsistent current flow.
Foldable tool tote is a type of tool bag that is designed to be collapsible and easy to store when not in use. It typically features a collapsible frame made of lightweight materials such as aluminum or plastic and a removable fabric bag that can be folded or rolled up for compact storage.
Foldable tool totes are ideal for professionals who need to transport tools to different job sites and want a bag that is easy to store when not in use. They are also useful for DIY enthusiasts and homeowners who need a portable and convenient way to store and transport their tools but have limited space for storage.
Some foldable tool totes also feature additional pockets and compartments for organizing smaller items such as screws, nails, and drill bits. They may also have reinforced handles or shoulder straps for easy carrying.
The benefits of a foldable tool tote include:
-
Space-saving design: The collapsible frame and removable fabric bag allow for easy storage in small spaces such as closets or car trunks.
-
Lightweight and portable: The lightweight frame and fabric bag make it easy to transport tools and equipment to different job sites or locations.
-
Versatility: Foldable tool totes can accommodate a variety of tools and equipment, making them a versatile option for different trades and applications.
When choosing a foldable tool tote, it is important to consider the size and weight of your tools, as well as the overall durability and quality of the bag. Look for a model with sturdy construction, reinforced handles or shoulder straps, and ample storage space to accommodate all your tools and accessories.
Foldable Tool Tote,Collapsible Tool Tote,Foldable Tool Bag,Portable Tool Boxes
ZHANGJIAGANG CITY XIANGLE TOOL CO., LTD. , https://www.xiangletoolbag.com