How to use CNC steel bar bending machine

The greatest value of energy-saving buildings or green buildings lies in saving resources and energy, protecting the ecological environment, cooperating with the sustainable development of the economy and society, and meeting the expectations of the people. In addition to the single-use forming hook, this machine can also be used as a high-performance straightening and cutting machine, with a straightening and cutting speed up to 50 meters/min. A hook bending machine can support 3 ordinary machines (1 straightening and cutting machine, 2 hoop bending machines); it saves labor, and each machine purchased can save 2 workers, creating very obvious benefits. This robot is designed with a very simple use. A worker who does not understand machinery can learn how to operate it in 10 minutes. The original reinforcement worker is more capable. The machine design is simple and the failure rate is low, the maintenance is convenient and the maintenance is low. Keeping pace with the development of the times, technology replaces manpower, and entering the era of CNC hooks, the product information is highly automated, the traction speed is fast, the work efficiency is high, and the straightening effect is good. It is programmed with a touch screen PLC programmable controller, and it can be produced as long as the product size is entered.

Several advantages: 1. Use steel bars to machine small materials to save materials. The general operation is to cut the steel bars into the site to cut them off, which can easily cause some residual short heads. We straighten and produce on-site, and it can be said that these waste phenomena have not occurred.
2. High working efficiency of using a plate reinforcement machine. An ordinary 3-4-person team can be straightened to 7-10 tons of steel bars every day. For example, for stirrup production, a hoop bending machine can make 12,000 to 20,000 stirrups in a day. Reinforced and horizontal reinforcement can be made 7-10 tons per day.
3. Detailed ingredients. For example, slab ingredients are generally made according to the slabs on each floor, which is convenient for workers to tie them.
4. High production standards. The stirrups, reinforcement, horizontal reinforcement, etc. produced have fewer errors than the standard standards made with old-fashioned hoop bending machines or bending machines. It is convenient for workers to tie them and will not waste too much time due to too much error. Rebar plate bar machine specializes in processing plate bar reinforcement negative reinforcement, small material equipment,

1. Straightening part: The straightening part consists of 19 straightening rollers and drives the straightening roller through the motor triangle pulley transmission system and reducer. The straightening roller is composed of 14 upper and lower rollers and five horizontal rollers. The down pressure of the movable straightening roller is adjusted to achieve the straightening of the steel bar. 2. Hydraulic shear part: The hydraulic shear part drives the Hydraulic Pump, solenoid valve, and relief valve by a 4kw motor to control the cutting of the oil cylinder. The cutting device is installed at the front end of the bent hoop part. When working, the stroke switch of the bent hoop part gives a signal, and the cutting and bent hoop work simultaneously. 3. Electrical control device: Electrical control device Electrical appliances are mainly composed of a straightening motor, a bent clamp motor, a hydraulic system motor, a solenoid valve, a console, a length control stroke switch and a circuit. Main data of electrical settings: The power supply is three-phase alternating current, 50HZ, 380 volts; the control power supply voltage is 220 volts; the straightening motor is 5.5kw; the bent clamping motor is 5.5kw; the shearing motor is 4kw 4. Automatic bend clamping device: The bend clamping device of the bend clamping machine is completed by five dials driving five bend points. During working time, the length stroke switch gives the bend clamping motor signal, and the bend clamping motor drives the dial to complete each action of the bend clamping in the following order.

The steel bar straightening and cutting machine is used for straightening steel bars. Different steel bars need to use different steel bars. Different manufacturers also have different requirements for the straightening speed of steel bar straightening and cutting machines. Due to the emergence of cold-rolled ribbed steel bars and third-level steel bars, the application of light round steel bars in buildings is becoming less and less. Therefore, the main working object of the steel bar straightening and cutting machine is threaded steel bars. The diameters of commonly used threaded steel bars in buildings are Ï†8mm, Ï†10mm, Ï†12mm, and Ï†14mm. The steel bar straightening and cutting machine produced by our factory has little loss to the steel bars and will not damage the steel bars, or scratch or twist the steel bars. It can guarantee that the straightening speed can reach 180m/min, and the straightening steel bars are also very smooth.

Sink Mixers

Our range of Kitchen taps and Sink Mixers are available in a gorgeous choice of designs. Choose from a range of contemporary or traditional Sink Mixer Taps or Kitchen Sink Mixer. For the ultimate flexibility, also take a look at our range of Kitchen Sink Mixers. Our Kitchen taps and Sink Mixers combine exceptional quality design with real value for money. Selected products in the range also include clever flow limiting devices to help save water. Taps with lever handles have also been designed to be easy to use and some of our ranges are suitable for low pressure.

Sink Mixers, Kitchen Sink Mixer, Kitchen Sink Mixer Tap, Single Lever Sink Mixer

ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.cn-kingsir.com