It is understood that the current raw materials for domestic panel furniture are mainly divided into four categories: first, low-priced, inferior plates used by small factories. Secondly, the plates produced by domestic small and medium-sized enterprises have low brand awareness and good quality. In addition, it is a well-known domestic brand “Lushuihe†plate, which is divided into many grades, and the environmental performance of high-quality products is very good. Finally, it is the import of plates, although the price of such plates is high, but the environmental protection factor is guaranteed.
The choice of panel furniture first look at the board, must be clearly written in the furniture contract, such as the board must be marked as superior or imported sheet (specify which country which brand), in addition to indicate whether "100% use ", and the use of the large brand of plain panels (we see the semi-finished products of the panel furniture substrate, but also need to be veneer processing) or the veneer (the finished substrate, the surface pattern of the melamine film has been pressed, cutting edge banding Used directly for furniture). If you say nothing, you should also check all kinds of certification materials. For example, in a furniture store that uses imported plates, you should see the authorization certificate, certificate of origin, and customs declaration materials. In addition, you can use the function of the nose, find some places with openings such as handle holes, hinge holes, etc. (there are veneers, harmful gases can not be released), the smell should be woody, pungent It is not qualified.
In addition to paying special attention to environmental protection, there are several tricks to choose good panel furniture:
First, check the appearance of the product and the quality of the surface. When purchasing furniture, it mainly depends on whether the surface of the furniture material has scratches, indentations, water marks, bubbles and residual substances in the glue leaving no bumps on the surface. Defects, the appearance of the furniture surface is clear and natural, smooth and flat, with good visual effects and feel. For the purchase of symmetrical furniture, it is necessary to pay attention to the consistency and coordination of the color and texture of the two panels. Block plates are from the same piece of material.
Second, pay attention to the firmness of the furniture structure, and gently push the furniture by hand. If there is shaking or making a sound, the structure is not firm.
Third, pay attention to the gap between the furniture activities. For example, the door joints and the drawer joints are suitable for the gap and the balance, and the door and the drawer should be freely opened and closed without noise, and the surface of the hardware fittings should be peeled off.
Fourth, check the quality of the edge of the panel. See if the edge of the panel is chamfered, uneven, and warped. The good edge should be tightly adhered to the panel, and the surface should be smooth and free from roughness.
Concerned about surprises
Label: How to pick up the furniture? Environmental protection is the primary indicator
Previous: What is diatom mud? What are the advantages of diatom mud? Next: Classification and processing technology of ceramic tile cracks
No-alkali accelerator are used to increase the rate of concrete strength development or to reduce concrete setting time. It is non-toxic, non-corrosive, non-flammable, chlorine-free, harmless to human health, low in springback, no dust and no pollution during construction, which can greatly improve the construction environment .
Concrete Accelerator,No Alkali Accelerator,Concrete Accelerator Agent,Cement Accelerator
NINGBO LUCKY CHEMICAL INDUSTRY CO. LTD , https://www.chinaluckychem.com