Paint is an indispensable material for decoration and home decoration. Generally, we invite special painters to carry out on-site construction. However, some simple furniture can be used by ourselves. The paint brush method also affects the overall effect of house decoration to varying degrees. The following Xiao Bian will introduce the decoration paint steps and precautions for everyone.
First, decoration paint step
1, first remove the clean wood products on the gray layer, dirt, etc., to keep the surface clean and tidy.
2. Polish the base layer, trim the defects such as burrs and cracks on the surface of the wood base layer, polish it with sandpaper, and keep corners neat.
3. Use a transparent putty or oily putty to scrape, re-suppress the putty, polish it with coarse sandpaper, wait until it's dry, put it on the second pass, and polish it with fine sandpaper.
4, brushing paint, refilling putty, dry with a fine sandpaper, remove the surface dust; then on the second pass paint, remove the surface dust after grinding and water sand for water, repair oil hanging part; Three times can paint.
Second, decoration paint notes
1, dark paint as far as possible not to participate in water, or prone to color; paint is best done in one-time, otherwise it is prone to color.
2, do not paint in wet weather or winter, otherwise it will affect the overall construction quality, paint is not easy to dry.
3, pay attention to indoor ventilation and heat dissipation, paint, paint, polishing, etc. to be completely dry after.
4, the brush brushing in the waiting time to dry, soak in the water, look good brush where there are no bubbles, if there is a bubble immediately broken.
Editing summary: About the decoration paint steps and precautions are introduced here. For more information, you can follow this site information.
paint
The portable routing machine is an electric Power Tools with a rotary cutter which is designed for the chip-removing shaping of wood and other materials. It can be used for example for edge trimming, fitting and trimming work. The drive shaft carries a router bit with shank which is predominantly positioned at right angles to the guide surface.
Electric Router,Stone Electric Router,Portable Electric Router ,Mini Electric Router
AWLOP CO.,LTD , https://www.awlop.com