A two-speed motor hot oil cleaning method is an effective way to remove hardened lubricants like soft dry oil or rust-preventive cream from bearings. To begin, place the bearing in hot oil that has been heated to a temperature between 100°C and 200°C. Use pliers to hold the bearing securely, then use a brush to apply the hot oil over its surface. As the oil heats up, it will soften and melt the hardened lubricant, making it easier to flush out of the bearing’s internal gaps. In some cases, simply shaking the bearing a few times in the hot oil can help the old oil drain away naturally.
When dealing with older motors or imported motors, especially those with centripetal spherical bearings, it's important to carefully remove the ball, cage, and inner ring from the outer race before immersing them in hot oil. For short cylindrical roller bearings, gently rolling them during the cleaning process helps ensure all parts are properly cleaned. In this case, the cage, inner ring, and outer ring should be separated for better access and thorough cleaning.
It's crucial to maintain the oil temperature below 200°C during the entire cleaning process to avoid damaging the bearing material or causing excessive evaporation of the oil. Always ensure proper ventilation and safety measures when working with hot oil, as it can be dangerous if not handled correctly.
This method is particularly useful for restoring old or heavily contaminated bearings, helping to extend their lifespan and improve performance. With careful attention to detail and proper technique, you can effectively clean bearings using the hot oil method.
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.stszcmparts.com