In order to keep the machine in good condition, give full play to its due function, achieve high yield, high quality, low consumption, and achieve economical efficiency, we must do the following in daily work:
1) Formulate and strictly implement the production line process specifications, operating procedures, operating standards, daily maintenance and maintenance systems, paying special attention to the quality of raw material processing.
2) Observe the change in vacuum. If the vacuum is found to decrease, replace the new mixing knife as described above to prevent the waste of production and waste of manpower and resources.
3) Strengthen daily maintenance, pay attention to the gap between the lower reamer and the seal cylinder liner, and the gap between the upper cutter and the seal cylinder liner. When the clearance is too large, increase the return flow of the mud, reduce the output, and heat the cylinder; when the upper cutter is worn, repair or replace the cutter.
4) If the speed of the extruded mud strip is slowed down, or there is a pulse phenomenon and the phenomenon of frequent blockage in the vacuum box, the wear condition of the double-line stirring blade and the wear of the sludge part should be checked and repaired in time.
5) The stop and start sequence should be strictly implemented in accordance with the operating procedures, operating standards and instructions in the instruction manual to prevent the occurrence of blockage.
6) If it is necessary to repair and replace parts during production, the motor must be turned off to prevent misuse and care, resulting in equipment and personal accidents.
7) Always check for looseness of the cutter screw, the trowel bolt, the fixed platen bolt, the pressure plate bolt, etc., and tighten it to prevent equipment failure due to parts falling off.
8) The installation position of the vacuum pump is generally not more than 5m from the vacuum extruded brick, and the center line of the vacuum pump and the center line of the vacuum extruder are on the same level. The intake line should avoid excessive bending angle and cause large exhaust resistance. .
9) When installing the machine head, machine mouth and core tool, it should be aligned with the center line of the screw reamer shaft to make the mud flow uniform, otherwise it will cause defects such as rotten corners and bending of the billet.
10) Production must control uniform feeding. The mud strip of the extruder is extruded. If the feeding is uneven or the extruder is unproductive, no mud strips will be extruded. Not only that, the squeezed mud sticks in the mud tank together with the spiral reamer to generate heat, which will cause serious heat generation of the mud tank and cracking of the mud strip.
This Baby Monitor is 2.4G camera & video monitor, no need WIFI like wifi camera, just a top Video Baby Monitor, you can take good care of baby in good temperature room and safety condition, if baby cry, awake or somebody want to touch him or her, you can see on the surveillance video monitor, as it's also Audio Baby Monitor with speaker, you can hear or speak to baby, play music for baby, this is smart baby camera, really best baby monitor.
Product Features
1, Hassle-Free Portable Monitors, video baby monitor.
2, 2.4Ghz digital signal, wireless signal, interference free, long range digital signal.
3, High contrast 2.0~7inch color TFT LCD monitor.
4, Two way(talk back), baby intercom, 2 way audio, you can hear the sound of your baby, and talk back to him or her.
5, Temperature monitoring and displaying on the LCD in real time, you can know the temperature all the time.
6, Built-in 8 lullabies in the camera, helping baby to fall asleep quickly.
7, Automatic IR night vision, 24 hours all day around security.
8. Built in Li-polymer rechargeable battery for the LCD(parent unit), the camera (baby unit) does not include battery.
9, VOX Mode, long battery life(8 hours in Vox mode, about 4-5 hours in working mode)
10, Feed time setting alarm, you can make the time alarm setting to feed your baby in routine time.
11, Multiple languages support(Portuguese/English/French/Spanish/Italian/German/Dutch/Turkish)
GENERAL:
1,Transmission Frequency: ISM 2400~2483.5 MHz
2,Transmission Power: 17dBm
3,Unobstructed Effective Range: 160ft/50m indoor/850ft/260m outdoor, line of sight
4,Spread Spectrum: AFH & TDMA
5,Modulation Mode: GFSK
6,Operating Temperature: 14 ~ 122°Fahrenheit/- 10 ~ +50°Celsius
7,Operating Humidity: <85%
1) Silk logo print on cameras
2) Customized camera housing
3) Customized color box
Sample order 3-5 working days, bulk order 7-15 working days accordingly to order agreement.
2 years free repairing. Whole life service for continue cooperating customers!
By Express(DHL/ FEDEX/ TNT/ UPS/ EMS/ CHINA POST), By Air, By Sea.
T/T, Paypal, Western Union, L/C, OA
We can print your logo on product or box, cost will be quoted according to logo designs, for quantity over 100pcs each model, we will offer freely printing(1color logo), no charge at your side.
Label can be done freely for bulk quantity OEM order.
We can do your own manual for bulk order 1K above, for less quantity we just only charge the manual cost per exact design.
We send you our box die-cut, you change your designs then we do according to your updated file. Sample box will be sent to you for checking before mass production.
Baby Monitor
Baby Monitor,Wireless Baby Monitor,Audio Baby Monitor
MBOSS INDUSTRIAL , http://www.mbosssmart.com