Common causes and solutions for impact crushers

Home>Bearing knowledge>Common problems and solutions for impact crushers
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Common causes and solutions for impact crushers

Source: Bearing network time: 2018-03-07

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
There are many common problems with impact crushers (impactcrushers); so the solution is different; Henan Yulong Heavy Industry Machinery Co., Ltd. technicians provide the following four common fault solutions:
First, if the impact crusher (reverse blow) bearing heat is found:
Explain that the bearing lacks oil; it needs to be refueled in time; of course, too much oil will make the bearing heat; when refueling, it must check the oil level; the bearing is damaged; the bearing should be replaced in time; the upper cover is too tight; the bolt should be adjusted; the tightness is appropriate.
Second, if the broken counterattack crusher (reverse blow) is found to be abnormal:
Explain that the material is too large; can check the feeding scale. Uneven wear; clarify the replacement of the counter hammer head; the rotor is unbalanced; need to be adjusted; the root is not properly disposed; the anchor bolts need to be viewed and reinforced.
Third, such as today's impact crusher (reverse blow) belt flip:
Explain the belt wear; replace the V-belt; due to the problem of belt transmission installation; the pulley should be adjusted on the same plane; must pay attention to the quality of the V-belt itself.
Fourth, if the counter-crusher (reverse blow) is found to have excessive particle size:
Explain the wear of the hammer head; the hammer head needs to be idle or replaced; the gap between the hammer head and the counterattack plate is too large; usually adjusted to 15-20mm; too large feed particle size will affect the discharge granularity.


Recommend to friends comments close window

Bearing related knowledge
Motor bearing abnormal sound analysis and solution
FAG high-precision bearing speed and cooperation clarify single-row angular touch ball bearings [touch angle 35°]
Selection of oil-free self-smooth bearings for detailed information on the basic requirements of rolling bearing materials


This article links to http://
Please indicate China Bearing Network http://

Previous: NTN bearing suffix code indicates the following: Note on SKF imported bearings on combine harvesters

Spare Part

Spare Part,Replacement Parts,Mobile Spare Parts,Original Parts

Shandong Shenli Rigging Co.,LTD. , https://www.shenliriggingcn.com