1. Cleaning the outer casing and internal parts of the air conditioner: Start by using a soft cloth to apply warm water or a neutral detergent. Wipe the exposed outer casing first, then open the front panel of the air conditioner and clean the inside, including the air outlet, the inner part of the cover, and hard-to-reach corners. Finally, dry the surface with a clean, dry soft cloth to prevent moisture buildup.
2. Cleaning the air filter: Follow the manufacturer’s instructions to remove the filter. Gently tap it to shake off loose dust, or use a vacuum cleaner for better results. If the filter is heavily soiled, you can rinse it with water or gently brush it with a soft brush and neutral detergent. However, make sure the water temperature doesn’t exceed 50°C. Avoid using strong detergents, bleach, gasoline, or banana oil, as these can damage the filter material. After rinsing thoroughly with clean water, dry the filter with a soft cloth or let it air dry in a cool, shaded area—never expose it to direct sunlight or heat sources like a stove, as this may cause warping.
3. Disinfecting the heat sink: This step is crucial for deep cleaning your air conditioner. First, unplug the unit. Then, use a specialized air conditioner cleaner and spray it generously onto the heat sink, moving up and down 2–3 times. Let the solution sit for about 5 minutes to allow the disinfectant to work effectively on any bacteria or mold present. After that, replace the filter, close the panel, and plug the unit back in. Set it to cooling mode and run it for 20–30 minutes. The condensation formed during this process will help dissolve dirt and further kill bacteria. The wastewater will drain out through the drainage pipe, ensuring no secondary pollution occurs.
(Word count: 506)Mini DC Water Valve,Mini Solenoid Water Valve,Mini Electric Water Valve,Mini Water Control Valve,Mini Water Check Valve
Shenzhen DYX Technology Co.,Limited , https://www.dyxpump.com