Stainless steel drilling

The machinability of stainless steel materials is much worse than that of ordinary carbon steel, and drilling is worse than turning. Therefore, the drilling of stainless steel materials is more difficult, mainly in the following two aspects. (1) Since the stainless steel has high plasticity and high toughness, the adhesion and wear of the drill bit during drilling are large. Stainless steel has low thermal conductivity and poor thermal conductivity. When drilling, the drill bit is surrounded by the surrounding hole wall, which makes heat dissipation more difficult. Due to the unreasonable geometry of the drill bit, the drill bit is prone to wear and durability.

Vacuum Glass With Mirror Eye

ICESUN Vacuum Glass LTD. adopts the unique vacuum eye technology to produce Gen3 vacuum glass with mirror eye. This mirror eye technology refers to place the nano active sodium barium film with the size of pupil in the vacuum chamber. When it encounters trace gas, the eye of vacuum glass would immediately undergo chemical reaction and change from black and bright mirror into white powder. The disappearance of the mirror eye indicates the increase of conduction and convection in the vacuum glass, and also indicates that the Low-E film will soon be oxidized and fail, and the radiation heat transfer would greatly increase. That is to say, the building glass will fail. Therefore, users can easily know the service life of their own windows at any time through installing our Vacuum Glass For Buildings. Besides, our company also provide other good quality and high performance Vacuum Glass For Transportation like cars, Vacuum Glass For Passive House, Vacuum Glass For Sun Room and skylight, etc.

Vacuum Glass With Mirror Eye,Low-E Vacuum Glass With Mirror Eye,Insulated Glass With Vacuum Eye,Vacuum Glass With Visible Mirror Eye

ICESUN VACUUM GLASS LTD. , https://www.icesunvacuumglass.com