Shoe cabinets are the furniture that every household sees when they enter the door. Nowadays, there are more and more households with shoe cabinets. How to maintain it after buying a shoe cabinet? The following small series introduces the common sense of shoe maintenance.
1. Shoe cabinet maintenance Use a clean soft cloth, often wipe the surface of the shoe cabinet dust, avoid using ordinary water, wet cloth, hard cloth to wipe the surface, mirror and glass. Avoid contact with acids, bases, and oils. When conditions permit, use high-purity industrial alcohol to wipe the board surface.
2, shoe maintenance should be cleaned with special detergent when removing the stain on the mirror or glass surface of the shoe.
3, regular maintenance of the shoe, generally can be carefully maintained once a quarter, after wiping the surface of the furniture with a soft cloth, evenly rub the furniture surface on the furniture. Light wax protects the furniture paint film from moisture, scratches and burns.
4, the shoe cabinet maintenance can not be used to hammer the hardboard and other hard objects to knock on the side of the shoe cabinet, and even less can be used on the board surface and cut. If it is found that the panel has a partial slit, it should be repaired in time. Otherwise, the crack will open up and even appear curved for a long time, resulting in complete damage.
5, shoe maintenance for the long-lasting or difficult to remove the stain can be removed with a small amount of gasoline or alcohol with cotton cloth, then use a piece of cotton cloth to spread the amount of glazing wax and then use a piece of dry cloth to block the wax evenly, so as not to stay Wax marks, and then the place where the paint layer has been damaged; the parts that are scorched by cigarettes, such as only the surface paint layer, can be dampened with fine water sandpaper, then gently wiped off the stain, and then waxed; the surface is scratched If it is not deep and woody, it can be polished directly by local polish. If the scratch is deep, it should be sanded. If the damage is deep, it should be polished and repainted to make the furniture surface lasting and moisture-proof. Metal fittings for furniture hardware can also be smeared and wiped with glazing wax to make it flexible to rotate and rust and anti-oxidation.
The article is edited by http://cd.gojiaju.com Chengdu Home Network.
Teach you the correct washing method for bamboo fiber home textile
Three little common sense that flower growers must know
How to effectively clean the bathtub stains?
Cleaning the door
Photo frame, photo frame, picture frame cleaning and maintenance tips
The secret of metal furniture forever
Custom Aluminum Machining Parts Precision CNC Auto Parts CNC Machining Tools Processing Service
Production flow:
Samples or 2D/3D drawings→ Mould Design→Mould Making →Die Casting and Other Processes →Get Samples and Send Samples to Customer for Confirm → Mass Production (casual inspection avoid unintentional situation) → QC → Packing →Shipping →Cycle To Next Order
Our Secondary Processes:
Custom Aluminum Machining Parts Precision CNC Auto Parts CNC Machining Tools Processing Service and Contracted Secondary Processes Including Shot-Blast, Vibratory Deburr, Heat Treating, Sanding, Ball Burnishing, Impregnation, Rubberizing, Polish, Buffing, Painting, Anodizing, And Plating.
CNC Parts, Aluminum Parts, Auto Parts, CNC Machine Parts,CNC Machine Parts, precision parts manufacturing,Tool Processing Service
Dongguan Hongge Hardware Technology Co., Ltd , http://www.honggecasting.com