National coal railway transportation capacity reaches 3 billion tons

National coal railway transportation capacity reaches 3 billion tons

The "Energy Development Strategic Action Plan (2014-2020)" (hereinafter referred to as the "Plan") released on November 23 confirmed that clean and efficient development of coal-fired power will change the mode of coal use, and efforts will be made to increase the ratio of concentrated and high-efficiency power generation in coal. To improve the access standards for coal-fired power units, the coal consumption for newly-built coal-fired generating units is lower than 300 g/kWh standard coal, and pollutant emissions are close to those of gas-fired units. In addition, we also mentioned the promotion of the construction of a large coal-electricity base. It will focus on the construction of 14 million-ton-ton large-scale coal bases in Jinbei, Jinzhong, Jindong, Shendong, Shaanxi, Huanghua, Ningdong, Luxi, Lianghuai, Yungui, Langzhong, Henan, Inner Mongolia, and Xinjiang.

Energy is the foundation and driving force for modernization. Energy supply and security are related to the overall situation of China’s modernization. Since the new century, China has made remarkable achievements in energy development, its supply capacity has grown steadily, the energy structure has been continuously optimized, energy conservation and emission reduction have been effective, technological progress has taken new steps, new breakthroughs in international cooperation have been achieved, and the world’s largest energy supply system has been built, effectively guaranteeing Economic and social development continues. Yesterday, the “Energy Development Strategic Action Plan (2014-2020)” (hereinafter referred to as “Action Plan”) issued by the General Office of the State Council once again mentioned the green low-carbon strategy. Efforts will be made to optimize the energy structure and take the development of clean, low-carbon energy as the main target for adjusting the energy structure. Adhere to the development of non-fossil energy and the efficient and clean use of fossil energy, gradually reduce the proportion of coal consumption, increase the proportion of natural gas consumption, substantially increase the proportion of renewable energy such as wind power, solar energy and geothermal energy, and the proportion of nuclear power consumption, so as to adapt to China's national conditions and be scientific and reasonable. The energy consumption structure significantly reduces energy consumption emissions and promotes the construction of ecological civilization.

For the future development of thermal power, the Action Plan clearly states that clean and efficient development of coal-fired electricity, changes in the use of coal, and efforts to increase the proportion of concentrated and efficient coal power generation. To improve the access standards for coal-fired power units, the coal consumption for newly-built coal-fired generating units is lower than 300 g/kWh standard coal, and pollutant emissions are close to those of gas-fired units. In addition, we also mentioned the promotion of the construction of a large coal-electricity base. It will focus on the construction of 14 million-ton-ton large-scale coal bases in Jinbei, Jinzhong, Jindong, Shendong, Shaanxi, Huanghua, Ningdong, Luxi, Lianghuai, Yungui, Langzhong, Henan, Inner Mongolia, and Xinjiang. By 2020, the base production will account for 95% of the country. Using the most advanced energy-saving water-saving environmental protection power generation technology, we will focus on the construction of 9 million-kilowatt large-scale coal and electricity bases in Xilin Gol, Ordos, Jinbei, Jinzhong, Jindong, Shanbei, Hami, Zhundong, and Ningdong. Strengthen the construction of coal and railway transportation corridors, focus on the construction of railway coal transportation channels from western Inner Mongolia to Central China, and improve the east-west coal transportation channels. By 2020, the national coal railway transportation capacity will reach 3 billion tons.

Aluminum Alloy Anodized Tube

1.Specification: Various size as customer's requirements
2.Material:A6063,A6061,A3003 and other series alu alloy        
3.Suface treatment: anodizing ,polishing,turning ,power coating,mill finish etc
4.Design:OEM,ODM,or design by ourselves
5.Equipment: CNC ,extruding machine,cold drawn machine,heating oven,straigtening machine,cutting machine  

OD

OD Tolerance

ID Tolerance

Roundness

straightness

Circular   run-out

φ16-20

±0.02

±0.02

0.01↓

0.015↓

0.05↓

φ20-30

±0.02

±0.02

0.01↓

0.015↓

0.05↓

φ30-50

±0.05

±0.05

0.02↓

0.020↓

0.08↓

φ50-80

±0.15

±0.10

0.05↓

0.025↓

0.10↓


6. STANDARD PACKING :Wooden case/carton

7. OPTIONAL PACKINGPolyfoam interleave inside, wooden case

 Anodized tube workshop

Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery.  L/C at sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai


Aluminum Alloy Anodized Tube

Aluminum Alloy Anodized Tube,Aluminum Anodized Tube,Aluminium Anodized Tube,Aluminum Anodized Pipe

Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com