tunnel Road kiln mouth 诀
The seven-point code blank is burnt for three minutes. The burning kiln must be remembered for training, and the small and reasonable ventilation is good, and the fire is stable and the output is high.
Under the thin and dense bottom of the fire protection, the middle and the thin side of the dense anti-burning, inside and outside the dense outer fire protection, vertical and horizontal seams run fast.
Hafeng pulls the seams well, the fire eyes can't be emptied, the smooth value is not falling, and the two sides are close and steady.
The coal fired in the bridge was scattered, the hole was in the wind and the fire was fast, and the fire was good. The fire road was smooth and high-yield.
The principle of roasting should be kept in mind, don't take it as a play, four words are mastered, and the actual operation should be careful.
Smooth preheating and good drainage, the sintering temperature should not be too high, the insulation cooling must be cautious, and the rapid quenching is bad.
Lead the fire to burn the billet, add the side fire to make up the heat, watch the fire catch the key, and keep the fire cool.
Look at the fire and add coal to do it, diligently add less fire, good low-temperature long-bake method, high energy-saving quality and high output.
The kiln looks at the basic work of the fire. The three fast and the two are not easy. The weather is not the same, and the inside and the outside must be seen separately.
Uncovering the fire and moving fast, the cold wind is going to be blame, watching the fire quickly and the temperature is accurate, slow fire can not be allowed.
The work of adding coal is not light, and there are many studies. The coal should be dry and smashed, and it will burn when it is put into the fire.
The action of coal injection should be fast. When the injection is completed, the fire eye will be covered, the time of coal injection will be mastered, and the fire in the kiln will be stable.
Ha dam It is the damper. It is necessary to control the fire by the gate. It is necessary to use the gate as a model.
The output of the step ladder is high, the bridge gate is good for the tide, the wind at the bottom of the far gate is good, and the close gate is high and the fire is running.
Slowly igniting and setting the fire smoothly, slamming and slamming the fire, and encountering the high temperature, panic, limit the pressure of the fire,
Blocking the door and blocking the wind, the wind pressure is reduced, the wind is strong, the local high temperature is exposed, and the cold wind is reduced.
Positive pressure fire eye heat release, also help to eliminate the fire, lift the brake Put the fire on, the first choice for severe high temperatures.
The strategy of car-selling and handsome is good, and it can keep most bricks from falling, or respect science, and ensure safe production.
Product name:Bicycle Spoke Wire
Standards:
GB 3206-82 Carbon Constructional Quality Steel Wire
JIS G 3521-1991 Hard Drawn Steel Wire
YB/T 5005-93 Steel Wire For Spoke
Diameter: 1.75-5.00mm
Usages: Motorcycle Spokes, Bicycle Spokes, ect.
Material: 30#, 35#, 30Mn, 40#, SWRH42A,SWRH 42B, 45#, 50#, 55#
Bicycle Spoke Wire
Bicycle Spoke Wire,Bicycle Spoke Steel Wire,Dimensions Spoke Wire,Bicycle Spoke Ironl Wire
TAIXING HONGYE STEEL WIRE MANUFACTURING CO.,LTD , http://www.steeltr.com