Common hardware wares include basins, toilets, bathtubs, shower rooms, hardware accessories, etc. The quality of their installation process directly affects our quality of life.
When installing hardware ware, follow the principles of living habits and convenient use to ensure that the installation is firm, beautiful, safe to use, and flexible to open.
Installation process
1, the installation of the toilet
When installing the toilet, check the sewage pipe first, cross the center line to determine the installation position of the bottom of the toilet, then use the electric drill to lay the installation hole, pre-embed the expansion screw, and install the special sealing ring on the toilet drain port. Finally, install it. Toilet, debugging water tank accessories.
2, the installation of the basin
First measure the installation height of the basin, mark it, punch the hole with the impact drill, install the expansion tube, then install the basin hook and fixing parts, connect the water inlet and drain pipe fittings, the column and the fixing piece, and finally in the basin. A mildew-proof silicone seal is placed between the upper mouth and the contact surface between the wall surface, the column foot and the ground.
3, the installation of the tub
According to the actual size of the bathtub, brick and cement are used to build the skirt and the bottom platform. The bathtub is inserted from the upper part, the sewer pipe is connected, and finally the glass glue is placed in the place where the bathtub is in contact with the skirt and the wall, which can effectively keep the bottom of the bathtub. Dry and extend the life.
4, the installation of the shower
According to the product size, measure the hole on the wall, perform the process of twisting the tube, smearing the lead oil, wrap the twine, etc., then dock the shower with the copper inlet, and pay attention to the lead in the copper inlet to prevent the raw The rust is oxidized, and finally the shower is straightened, and the disc is fixed to the wall with wood screws.
Installation Precautions
1. Determine the location of water pipes and wires according to the waterway and circuit diagram. When installing the hardware and sanitary ware, be sure to avoid the water pipes and wires to prevent breaking the water pipes and breaking the wires.
2, when installing the basin, bathtub and other products, you need to pay attention to the flatness of the wall and the ground; pay attention to the strength when tightening, so as to avoid damage caused by excessive force.
3. When installing hardware ware on the surface of the tile, it is recommended to ask the professional master to carry out the construction to avoid cracking the tile.
4. Do not damage the waterproof layer when installing hardware ware.
5, it is best not to change the position of the original down pipe, floor drain, otherwise it is easy to cause flooding.
Exterior wall profile
Exterior Wall Tiles is mainly used for the decoration and protection of the building's exterior wall. Exterior wall tiles not only decorate the entire building, but also because of its acid and alkali resistance, physical and chemical properties of stability, to protect the wall has an important role, but also cold insulation. External walls can be stock sales, but also according to customer specifications and color of the special requirements of custom production.
How to choose exterior wall tiles
1, according to the level of External Wall Tile logo selection, the tile is divided into five levels, there are superior products, first-class products, second-class products, third-class products and other goods of the difference, due to larger spreads, to be carefully compared. In addition, in the purchase, but also pay attention to the logo on the tiles and packaging specifications, color number is consistent, product certification, trademark and quality control standard is clear.
2, according to the size of the outer wall of choice, standard size, unfavorable to the construction, better reflect the decorative effect. Good deviation of the specifications, paving the tidy uniform, brick straight, decorative effect is good. Dimensional error is greater than 0.5 mm, flatness greater than 0.1 mm of product, unfair to increase the difficulty of construction, while the decoration effect is poor. Whether the size meets the standard can be judged by the target. The bricks placed on a flat surface to see whether the four sides of the flat surface exactly match, at the same time, to see whether the four corners of the tile are right angles. Good newspaper no bump, bulging, Qiaojiao and other defects, the side of the error does not exceed 0.2-0.3 mm, the thickness of the error does not exceed 0.1 mm.
3, according to the exterior wall pattern selection, good ceramic tile pattern, pattern color clear and consistent, exquisite craftsmanship, no obvious leak color, dislocation, broken or inconsistent depth.
4, a careful observation of whether the color difference of the external wall tiles, color tiles, is directly related to the decoration effect. Not a batch of products, or the same batch may have color, therefore, in the purchase process, for each packaged product sampling comparison, the tiles placed in the same species and the same type of brick, observe its The degree of color difference, a good product color is small, the basic color tone between products, bright color uniform, brilliant, and poor product color larger, the product shades of color.
Exterior wall tiles types(Marble Effect Tiles,Slate Effect Tiles,stong effect tiles, Wood Effect Tiles ,Brick Effect Tiles)
1, according to product material classification:
Glazed wall tiles, wall tiles and other whole body.
2, according to molding classification:
Extrusion molding (pottery curtain wall, split brick, etc.) and dry-pressure molding (small external walls, etc.).
3, according to the mode of production:
Pad plate kiln wall brick, straight roller kiln wall brick, tunnel kiln wall brick.
4, according to the packing method
Stickers outside the wall, such as external wall tiles.
5, according to the surface texture classification:
Bright, matte, matte and so on.
6, according to the surface classification:
Plane, sandstone surface tiles, water ripples, split brick surface tiles and so on.
7, according to the construction method classification:
Paving the outer wall, dry hanging pottery wall panels and so on.
External wall size specifications
Exterior wall tiles are available in 25 * 25mm, 23 * 48mm, 45 * 45mm, 45 * 95mm, 45 * 145mm, 95 * 95mm, 100 * 100mm, 45 * 195mm, 100 * 200mm, 50 * 200mm, 60 * 240mm, 200 * 400mm and so on.
Advantages and disadvantages of exterior wall
Advantages of external wall:
1, the outer wall tile surface no matter whether it is shiny, and flat or rough, will have a different texture, its appearance is very decorative.
2, the external wall of the rugged, with good durability and texture, colorful and rich decorative effect, and has easy cleaning, fire, water, abrasion, corrosion resistance and low maintenance costs.
3, durability in the Outer Wall Tiles , which includes durable, dirt-resistant, scrub-resistant and so convenient, and its long service life.
Disadvantages of the external wall:
1, the outer wall tiles for the first time higher cost, higher paste requirements, construction difficult, but not easy to cause construction technology off the wounding, but also must be waterproof material to solve waterproofing problems.
2, from the environmental point of view, the outer wall tiles in the cleaning process with acid will cause pollution to the atmosphere.
Exterior Wall Tiles
Exterior Wall Tiles,Stone Effect Porcelain Tiles,Slate Effect Tiles,Stone Effect Porcelain Tiles
UMS New Materials Industry Co.,LTD , https://www.ums-factory.com