There are many types of flooring, common are: wood flooring, laminate flooring, laminate flooring, and more. Composite flooring is the first choice for everyone. Why is laminate flooring so popular? In daily life, some floors need to be waxed and maintained to ensure that the floor is insulated from air and water. Therefore, people who are installing laminate flooring in home renovations will also be concerned about how to maintain composite flooring. Is it necessary to wax the laminate flooring? I believe that many people do not understand this very well. But don't worry, if you're still confused about the need for waxing laminate flooring , come with me and learn about it!
Advantages and disadvantages of laminate flooring
Composite floor advantages:
1, compared with the traditional floor, large specifications, since it is an advantage is also a disadvantage.
2. Many colors, wide lines, and wide choices are good choices.
3, compared with ordinary floor, wear, high hardness, superior performance, favored by consumers.
4, easy to install, forming a precise bite can be, without glue.
5, cost-effective, in line with the general level of consumption.
6, easy care, stains, wipe with a small amount of cloth cleaner can be wiped.
The disadvantages of laminate flooring:
1. Poor repairability. Once damaged, it must be replaced.
2. Compared with wood flooring, the density is high and the foot feels bad.
3. The use of formaldehyde adhesives in production will release certain formaldehyde.
Composite floor points
1, wear-resistant rotation. Measure the important indicators of floor quality. In general, the higher the wear resistance number, the longer the floor life, but the wear value is not the only standard to measure the number of years. The number of wear-resistant revolutions reaches 10,000 to excellent products, and products with less than 10,000 rpm will exhibit different levels of wear after 1 to 3 years of use.
2, swelling after water absorption. The indicator is considered as qualified within 3%. Otherwise, the floor may be deformed under the condition of high humidity or high humidity, and the surrounding seal is not tight, affecting daily use.
3, formaldehyde content. This is the key to their own health, but it is easily overlooked by consumers. According to European standards: formaldehyde content per 100 grams of floor does not exceed 9 milligrams, exceeding 9 milligrams is unqualified.
4, floor thickness. The thickness of the floor is 6 to 12 mm. The thicker the floor, the longer the service life, but the actual needs need to be considered.
5, assembly effect. You can take two pieces of jigsaws to see if they are neat and tight after assembly.
6, floor weight. The weight of the floor depends on the density of the substrate. The substrate determines the stability and impact resistance of the floor, so the better the substrate, the higher the density and the heavier the floor.
7, regular certificates and inspection reports. When you are on the floor, find out the relevant business certificate and quality report.
8, environmental performance. The choice of floor should consider environmental protection, followed by product performance and price. You can confirm whether it is an environmentally friendly product by looking at the green certificate.
9, after-sales service. Composite floor installation requires professional installation staff, consumers need to ask whether the business has a professional installation team, and whether there is a formal warranty certificate and warranty card.
Does the laminate floor need waxing?
Laminate floor is best not to wax and do essential oil care, strengthen the floor surface is AL2O3, good wear resistance, poor adhesion. After waxing, the place where you walk frequently will polish the wax. There will be less places to go. There will be two kinds of brightness at that time. If you want to wash, you can't wash it off. Re-waxing is also two colors, the final result is noisy.
Editor's summary: The above is the compound floor need waxing? How to maintain the relevant knowledge of composite flooring, I believe that after reading these introductions, for the composite floor need waxing you should understand. But also to remind everyone that the maintenance of the floor is not only related to waxing, but also pay attention to some other maintenance details in life.
Does the laminate floor need waxing?
Cutting mode: Laser cutting
Suit material: carbon steel, alloy steel, galvanized plate, stainless steel, copper plate, aluminium plate, steel tube, copper pipe, aluminium pipe etc. sheet matal.tube stock.
1.Product describe
Fast cutting spead, high working efficiency and high stability, it is a high-tech equipment that set one of fiber laser technology, CNC technology and high-tech equipment.
2. Product features
Imported with original packaging servo motor and reducer, bilateral drive, high operating speed and high precision.
Can remote operation, convenient and efficient, save labor.
Imported cutting head, optical glass, focusing is convenient and cutting perfect.
Fiber transmission, no need to adjusted the optical circuits, focal spot is more smaller.
Adopted auto lubrication system, auto dual-temperature control syatem, convenient and efficient.
High precision grinding guide rail, gear and rack, precision class up to ±0.02mm.
3.Product parameters
|
Type |
TI-3015 |
|
Effective cutting width ( mm) |
1500 |
|
Effective cutting Length ( mm) |
3000 |
|
Circular tube diameter ( mm) |
10-150 |
|
Square tube size ( mm) |
10-150 |
|
Range of vertical stroke ( mm) |
0-200 |
|
Input power |
AC380V/50Hz;AC220V/50Hz |
|
Cutting thickness ( mm) |
0.3-15 |
|
Cutting speed ( mm) |
21000 (1000W/stainless δ1mm) |
|
Idle speed ( mm) |
100000 |
|
Maximum Acceleration (G) |
1.2 |
|
Position repeat accuracy ( mm) |
±0.05 |
|
Laser power (w) |
500-1500 |
|
Drive mode |
Precision rack bilateral drive |
|
Laser wavelength ( nm) |
1080 |
|
Cooling mode |
water-cooling |
|
Environmental temperature |
5-35℃ |
|
Cutting material |
Carbon steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet |
4. Cutting samples
Manganese Steel Plate Cutting Machine
Cnc Laser Cutter,Manganese Steel Plasma Cutting Machine,Manganese Steel Gantry Cutting Machine,Manganese Steel Plate Cutting Machine
Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com