Advice from people: The point of renovation of an open cloakroom

In the open cloakroom, although the storage space is large, it is convenient to take clothes. However, the open cloakroom also has insurmountable flaws, which is poor dust protection. In addition, many points need to be taken into consideration when designing open cloakrooms, such as moisture protection issues, size issues, etc. Many people do not pay attention when designing the cloakroom. When they are used, they will find that it is not suitable here. There are too many, there is nothing to regret, but in fact, then, what are the points for the open cloakroom ? It's up to you to tell you, what are the highlights of the open cloakroom ?

What is an open cloakroom?

An open cloakroom is one where the walls are hollowed out to make a closet and store clothes, but such wardrobes are really closed cloakrooms. The open cloakroom has good air circulation, which is conducive to moisture protection, spaciousness, and more comfortable and convenient dressing. It is more suitable for young people. However, the shortcomings of the open cloakroom are also very obvious, that is, the dust is poor. Therefore, the open cloakroom design needs to pay attention to the dustproof problem, or when used, the dustproof hood is used to block the hanging clothes, and the storage is utilized on the shelf. Box placed folding clothes, are a good way to prevent dust!

Open cloakroom design points

I. Design of open cloakroom structure based on actual needs

Before we design the cloakroom, we must consider individual needs, and think about the characteristics of the clothes we have and their families, whether it is folding clothes or more hanging clothes, and there are not many beddings at home. Then, according to the classification characteristics of their clothing, design the structure of the cloakroom. We need to consider these design issues: For example, what functions the cloakroom needs, and how specific structures are located. At the same time, we need to consider the specific structure of the cloakroom functional areas, such as how the clothes are partitioned and how the size and size of the partitions are allocated. When designing cloakrooms, it is best to fully communicate with designers and conduct structural design according to their own needs.

Second, cloakroom light source is best close to the light source

The light color of the cloakroom needs to be very careful, because light shades may affect the effect of your clothes. The light in the cloakroom should be well integrated into the entire environment. It is best to use a light source that is close to fluorescent lamps. It should be noted that the light must not be too dark, and the dull lights affect the color of the entire environment, change the color of the clothes, and affect the effect of the entire match. Therefore, we must choose a light source that is close to daylight so that it can present the most authentic With the effect, so that the color of the clothes to save the original look, some people prefer the warm yellow tone of the light, we can eradicate the individual needs and love to carry out with the design.

Third, the relationship between hardware quality cloakroom life

The quality of hardware can often affect the life of the cloakroom. These hardwares are an important part of quality assurance. If you only plan to be cheap at the moment, it will cause trouble for maintenance. Designing a sitting pier or telescopic pull bar in the locker room is a humanized design when it is possible to sit and hang when replacing clothes.

Fourth, the cloakroom and the wall gap to keep a good size

The open cloakroom is actually a wardrobe embedded in the wall. The dimensions of the cabinet must be at least 5cm with the surrounding wall to facilitate the installation on the ground. The so-called tight seam is actually a misunderstanding.

Fifth, do a good job of moisture treatment

The cloakroom is mainly used to store clothing and other textiles, and it needs to be kept dry and breathable. Otherwise, the clothing is easy to mold and rot. Most architectural design ideas place the storage room closer to the kitchen and toilet. At least one wall is like this. If your home's lockers fall into this category, the issue of moisture protection becomes especially important. If your cloakroom is adjacent to the kitchen and toilet, you must first do a good job of waterproofing the bathroom or kitchen. During use, some moisture-proof agents can be placed in the kitchen.

6. The size of the cloakroom depends on the circumstances

The formation of a closet usually has two types: one is the division of the building itself, and the other is the division of the space by itself or the designer. If it is the former, then the space in your home must not be small, and the space in the cloakroom should not be too small. The latter does not need to be large in space, enough to use, the most important thing is to see you and your family's clothing is not much. Generally, some clothing that is hardly worn at ordinary times, it is better not to take up space. After finishing, please send them out. This is the best embodiment of the activity space.

With regard to the relevant knowledge about the decoration points of the open cloakroom , Xiao Bian introduced it to everyone here. In many cases, when designing open cloakrooms, we did not consider the use of functions and blindly demanded good looks. When we actually used them, we found that some of the designs were not practical or were inconvenient to use. So when we designed the open cloakroom, You can look at the experience of the "old driver" and avoid detours. For more information, please follow this site!

Cloakroom Cloakroom Renovation Cloakroom Design Cloakroom

Zirconium Alloy Products

Zirconium Target ,Zirconium Bars,Zirconium Tubes

Baoji Yongshengtai Titanium Industry Co., Ltd. , https://www.bjystititanium.com