Xi'an decoration classroom furniture production engineering construction process and process
1, familiar with the design, construction according to plans. Check the material, qualified to use. Use as much as possible.
2. The partitions of the upper and lower cabinet doors of the closet shall be double-layered in the cabinet to increase the strength and avoid deformation of the cabinet. The maximum length of the door should generally be ≤1650mm.
3, cabinet partitions should seek the views of customers, the use of fixed partitions and movable partitions in the cabinet partition.
4, cover the use of white latex, nails fixed, white latex should be brushed evenly enough, when trimming, it is strictly prohibited repair the panel.
5, cabinet door leaf production, the thickness is generally about 20mm, using wood board production, as far as possible cross-opening, to prevent deformation. If MDF is used as a door, if there is a water seam on the front, then the opposite side should be made with the same size, depth, and depth of the water seam, so as not to bend the board surface. After the production of the door leaf is completed, it should be placed on a flat site and pressed with a heavy object for a period of not less than 3 days. Correctly installed in the order of production.
6, the door length exceeds 1600mm to install three hinges. When using finished closet doors, it is necessary to consider whether the position of the drawer is proper and to ensure the correct use of sliding doors and drawers.
7, furniture size knowledge:
1 Clothes Hanger Height 1.8m 2 Long Coat 1250mm Short Coat 1020mm Suit 780mm Dress 1100mm
3 bookcases, small books are generally 210mm high X150mm wide (16 open), medium book 300mm high X220mm wide, bookcase depth 280-350mm
4 wardrobe depth 550-600mm, internal drawer height 200mm
5 computer desk height 700-750mm pull pumping 100-120mm high 6 computer case 450mm high x 200mm width x 450mm deep, keyboard sliding not less than 500mm empty
7 wine cooler separated by 300-450mm
8 balcony low cabinet 800-900mm thick 400-600mm
The height of the TV cabinet used in the 929-34 inch TV is about 450mm, and the height of the rear panel TV is 150-200mm.
10VCD width 428mm×360mm×90mm Power amplifier 428mm×360mm×120mm Medium sound 300mm×350mm×900mm, all cabinet kick angle is 80mm.
Acceptance Criteria:
1, the appearance of the panel wood straight, beautiful, small color, the board no flaws, scratches and other damage.
2. Picking up the use of lines, uniform color, no obvious defects, straight seams, cleanliness, repair the panel without trimming.
3. There is no deformation of the door leaf, it can be opened freely, the gap between the door and the door is even, the size is 1-2mm, and the door can't exceed the cabinet cap when the door leaf is closed.
4, hinges and other cabinet hardware installation and fastening, open flexible, complete screw, slide loose and comfortable.
5, the cabinet is clean, no pollution, the backplane should be fixed firmly.
6, cabinet verticality ≤ 2mm, horizontal error ≤ 1mm, warpage degree ≤ 2mm, diagonal error ≤ 3mm.
1, familiar with the design, construction according to plans. Check the material, qualified to use. Use as much as possible.
2. The partitions of the upper and lower cabinet doors of the closet shall be double-layered in the cabinet to increase the strength and avoid deformation of the cabinet. The maximum length of the door should generally be ≤1650mm.
3, cabinet partitions should seek the views of customers, the use of fixed partitions and movable partitions in the cabinet partition.
4, cover the use of white latex, nails fixed, white latex should be brushed evenly enough, when trimming, it is strictly prohibited repair the panel.
5, cabinet door leaf production, the thickness is generally about 20mm, using wood board production, as far as possible cross-opening, to prevent deformation. If MDF is used as a door, if there is a water seam on the front, then the opposite side should be made with the same size, depth, and depth of the water seam, so as not to bend the board surface. After the production of the door leaf is completed, it should be placed on a flat site and pressed with a heavy object for a period of not less than 3 days. Correctly installed in the order of production.
6, the door length exceeds 1600mm to install three hinges. When using finished closet doors, it is necessary to consider whether the position of the drawer is proper and to ensure the correct use of sliding doors and drawers.
7, furniture size knowledge:
1 Clothes Hanger Height 1.8m 2 Long Coat 1250mm Short Coat 1020mm Suit 780mm Dress 1100mm
3 bookcases, small books are generally 210mm high X150mm wide (16 open), medium book 300mm high X220mm wide, bookcase depth 280-350mm
4 wardrobe depth 550-600mm, internal drawer height 200mm
5 computer desk height 700-750mm pull pumping 100-120mm high 6 computer case 450mm high x 200mm width x 450mm deep, keyboard sliding not less than 500mm empty
7 wine cooler separated by 300-450mm
8 balcony low cabinet 800-900mm thick 400-600mm
The height of the TV cabinet used in the 929-34 inch TV is about 450mm, and the height of the rear panel TV is 150-200mm.
10VCD width 428mm×360mm×90mm Power amplifier 428mm×360mm×120mm Medium sound 300mm×350mm×900mm, all cabinet kick angle is 80mm.
Acceptance Criteria:
1, the appearance of the panel wood straight, beautiful, small color, the board no flaws, scratches and other damage.
2. Picking up the use of lines, uniform color, no obvious defects, straight seams, cleanliness, repair the panel without trimming.
3. There is no deformation of the door leaf, it can be opened freely, the gap between the door and the door is even, the size is 1-2mm, and the door can't exceed the cabinet cap when the door leaf is closed.
4, hinges and other cabinet hardware installation and fastening, open flexible, complete screw, slide loose and comfortable.
5, the cabinet is clean, no pollution, the backplane should be fixed firmly.
6, cabinet verticality ≤ 2mm, horizontal error ≤ 1mm, warpage degree ≤ 2mm, diagonal error ≤ 3mm.
Sofia wardrobe wardrobe brand TV decoration wine cabinet decoration design furniture drawer cabinet cupboard cabinet door cabinet closet door closet cabinet door
Field Fence,Farm Fence Netting,teel Bar Fence
Xinlong Wire Mesh Manufacture Co., Ltd. , http://www.hebwiremesh.com