Introduction of the new steam recovery machine

The new steam recovery machine for steam heating and drying equipment to recover the end of the steam heating condensate recovery equipment. It is composed of water tank, high temperature and pressure multi-stage recovery pump, pipe valve and automatic control system. Condensate water formed at the end of the steam equipment enters into the water return pipe through the steam trap, and if it is a plurality of steam utilization equipment and the steam pressure is the same, it can be rejoined to the water storage tank of the new steam recovery machine. If the steam pressure Different, you must add special grid-connected devices. And then parallel into the storage tank This completes the first step of condensate recovery; (back to the tank) The second step is to return the condensate through the level control back to the boiler. The energy-saving effect of the new steam recovery machine, a year in different industries than the great difference, the general is the greater the steam pressure, the greater the energy-saving ratio. The advantages of energy-saving effect, trap plays an important role. 1, the quality of traps to clearance, to ensure that the amount of steam leakage below 1%. Equipment work, hand on the top of the trap, the hand can withstand only two steam generation, trap is qualified. 2, the selection of traps to be reasonable, when purchased to trap manufacturers to provide steam equipment type, working pressure, working pressure, connection and other data. In order to achieve the best hydrophobic effect. 3, traps installed properly, the pressure of the water tank will be in a very stable range, reducing the displacement of secondary steam so that a lot of energy conservation.