1, nitro-lacquer (wood varnish): mainly used for high-grade decorative wood surface. The paint film is fast drying, hard, good gloss, good wear resistance, suitable for water polishing, excellent brightness after coating. However, due to the large proportion of solvents, the nitrocellulose lacquer has a slightly poor hiding power. To achieve a certain thickness, at least 12 degrees. Therefore, the use of nitrocellulose lacquer requires very high processing on the base layer, and strict control over the temperature, humidity, and lime soil of the environment. Otherwise, quality accidents can easily occur.
2. Polyurethane Ester: It is a synthetic type. It is divided into single component, double component and multi-component. It is characterized by fast drying, hard film and wear resistance, alkali resistance, strong adhesion, good water resistance and good gloss. Suitable for wood products, best suited to flooring. Polyurethane paints not only have varnish, but also paints and primers, which are costly.
3, color paint: mainly used for mixing water brush, with different colors. Among them: Nitrocellulose paint films of various colors are fast drying, smooth and smooth. They are mainly used for high-grade finishes; colored phenolic enamels, bright color, good gloss and good adhesion.
4, latex paint: There are high light, semi-high light, matt three kinds, used for interior and exterior wall decoration.
How to identify paint quality:
1. Varnish: The product name, type, color, production time, expiration date, use instructions, certificate of conformity, and the name of the product should be on the package. After opening, the paint is clear and transparent, no over-dark color, no agglomerate, and no precipitate. , Consistency appropriate, no rust in the barrel invade the paint solution.
2, color paint: packaging should have the product name, type, color, production time, expiration date, instructions and certification, name; open, no crust, the surface of a thin layer of oil or thinner, clear color , It is easy to stir, the consistency is appropriate, and the color is the same as that stated on the package.
3, latex paint: packaging should have the product name, type, color, production time, expiration date, instructions for use and certificate, name; after opening, no special smell, no agglomeration, no thinner and paint separation The phenomenon, the color and the package are the same.
In addition, the coloring pigment can not only cover the defects of the object, but also increase the hardness of the paint film. Adhesion, consumers can choose different colors according to design requirements and hobbies, and require the construction party in the area of ​​not less than 0.5 square meters of swatches to play "color samples."
Three trees paint nature floor paint latex paint paint decoration
Pc Rod is a high-quality bar made of polycarbonate as the main component and co-extrusion technology CO-EXTRUSION. Because the surface is covered with a high concentration of UV absorbers, in addition to UV-resistant properties,it can maintain long-term weather resistance and never fade.PC Rod connection can be connected with special glue to effectively prevent leakage.PC rod has good mechanical properties,light weight,impact resistance and weather resistance,maintain stable physical properties in the range of -40 ° C to +120 ° C.
Product
Diameter(mm)
Length(mm)
Color
Density(g/cm³)
PC ROD
20-200
1000
clear
1.2
PC Rod
Pc Rod,Polycarbonate Rod,Pc Plastic Rod,Pc Solid Plastic Rods
Shenzhen Anheda Plastic Products Co.,Ltd , http://www.ahdplastic.com